Description: The AquaVita Air Pumps are great for adding the amount of PSI needed to your engraving/cutting projects, especially when used in conjunction with our air assists. These very quiet pumps feature a double diaphragm for long lasting reliability. All models have a 5’ power cord. Our pumps are cheaper and comparable to the Vivosun compressor that you'd find on Amazon.Things to remember when picking your air assist:- The more air the better for cutting (to a certain point). Lower liters per minute pumps will work for keeping your lens clean and improve charring but will be less effective for cutting. - The length of the air tubing that you run from your pump to your nozzle will also affect your burn - the longer the hose, the less pressure you will have at the nozzle. We recommend not using over 6 feet of air tubing.- Nozzle size also effects your air assist system. Our air assists come standard with a 2mm diameter nozzle (exit point). With higher volume pumps you will want to also increase your nozzle size to allow for the air to exit the tubing faster. Our Nozzle Packs have different shapes and diameter nozzle to experiment with and help you find your perfect airflow. King Gubby's shop recommendation for engraving:- We are using the 75L/min pump for engraving, and we have found that to be the best output for that purpose, although the lower pumps also work well, our testing has shown the 75L to be optimal.Watch the video - https://youtu.be/_2onIW5wByE?list=TLGGdOCwtnQOawQzMDA5MjAyMg- The 110L/min & 143L/min pump is for dual or multi-laser setups. Every purchase of the 143L pump comes with a hose splitter that allows you to send air to 2 air assists (air assists and hoses sold separately). This is a great setup for our Mega Enclosure Tent - 2 Lasers (400mm x 400mm or less) in one enclosure, with a single air pump running the air assists. Feel free to reach out if you have any questions. The pumps come with brass hose barbs which are size-specific to the corresponding pump size (L/min). There is also about 6 inches of rubber hosing that comes with the pump that is the appropriate size to fit over the brass barb. We supply you with a hose barb reducer to connect your included pump hose to the 6mm air tubing that you will use for your air assist (King Gubby's air tubing is 6mm outer diameter and 4mm inner diameter). Air Dividers Included - but not needed for our air assists.
Price: 109.95 USD
Location: San Diego, California
End Time: 2024-03-01T06:36:57.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: AquaVita
Type: Piston Compressor
