1/2HP Submersible Sump Pump 2500GPH Utility Water Pump for Pool Pond Draining

Description: About this item 🔻【AUTOMATIC MODE】Once the sump pump is plugged in, it will automatically start when the water level is above 4", and shut off when reaching the stop-level of 2". When you start to use this pump, tilt and submerge the pump into water for a few seconds to expel the air inside of the pump. 🔺【MANUAL MODE】If the water level is not high enough to start with auto mode or you want to remove water as lower as possible (0.5"), you can switch to manual control. Pump will keep continuously running and will not turn off automatically, so remember to cut off the power immediately to prevent the motor becoming burned! 💪【POWERFUL PERFORMANCE】1/2HP POWERFUL MOTOR ensures effective pumping. The pump has a maximum capacity of transferring water up to 2500 GPH with 1.25" discharge hose horizontally. It can lift water up to Max. 26 ft vertical. This submersible pump works with CLEAN water or slightly dirty water, and its bottom grid allows it to pass Max. 0.2" solids. 💪【SAFETY ENSURE & RELIABLE】UPGRADED SEALING STRUCTURE gives pump longer durability, which is much longer than regular mechanical seal. Full corrosion-resistant shell and THERMAL PROTECTION ensures the pump will not be burned out, even when the pump triggers thermal overload protector, the pump will rework after cooling down. 💪【EASY INSTALLATION】Comes with three plastic adapters: GHT 3/4"+NPT 1" connects standard garden hose for quick installation; G1.25" discharge port connects discharge hose for high capacity pumping. 💪【WIDELY APPLICATION】Pump also comes with a 16.4ft long cable cord and a 26 ft nylon rope, which allows the pump to submerge deep enough in the water. Ideal for heavy-duty draining applications including pools, ponds, pits, wells, ditches, basements, etc.

Price: 60.49 USD

Location: Monroe Township, New Jersey

End Time: 2025-01-13T10:31:35.000Z

Shipping Cost: 0 USD