12in Diamond Knife Sharpener Steel Honing Rod Oval Stick Kitchen Sharpening Tool

Description: Description 🔪Features Electroplated Diamond Abrasive: Diamond features sharp,high hardness, wear-resistant, which helps deliver fast honing Widened, Oval Shape of Rod: Widen the area of sharpening and improve the efficiency ABS High Strength Plastic Handle: ABS feastures high rigidity and good abrasion, which makes the rod stable and no shaking. Even with great force, the handle won't break. Ergonomic Design Handle: Enhance comfort and non-slip during honing. Rust-Proof: Made of Diamond ABS (Acrylonitrile Butadiene Styrene), this Knife Sharpener prevents corrosion and rust. Good choice for smoothing out the rough edge on a blade after you sharpen a knife on a whetstone. Good choice for reviving or straighten the knife edge after each use of it. It helps keep the knife sharp. 🎉Specification Type: 12-inch Knife Sharpener Material: Diamond ABS (Acrylonitrile Butadiene Styrene) Color: Black Silver Grit: 600# Size (Diamond part): 30cm/12" Total Length: 43cm/17" 💯How To Use With your left hand, hold the sharpening steel point-down, with its tip resting firmly on a dry cutting board — as if it were a large nail you were about to hammer into the board. With the other hand, hold the knife crossways against the steel with the back of the blade (the part nearest the handle) touching the steel. You're going to be pulling the knife backward, toward you, so you want to start with most of the blade in front of the steel. Tilt the knife so that its cutting edge meets the shaft of the sharpening steel at a 22½-degree angle. Don't have a protractor handy? That's OK! Remember that 90 degrees is a right angle, and 45 degrees is half of that. So 22½ degrees is just half of that. Now, maintaining this 22½-degree angle, gently pull the blade toward you while simultaneously gliding it downward along the shaft of the steel. You want to cover the entire length of the blade, keeping the blade at that 22½-degree angle the whole time. Imagine you're trying to slice off a very thin piece of the knife steel. Do this step 10 times. Switch to the other side of the blade, give it ten more strokes on the steel and you're done! ✅Using Tips Do not add water or oil during honing After using the sharpening steel, rinse and carefully wipe the blade dry with a towel so that any tiny metal filings on the knife's edge don't end up in the food you're about to work with. Keep your knife steel handy while you're working in the kitchen. Just a few minutes of ordinary slicing on a wooden or plastic cutting board can knock your knife's delicate edge out of alignment. Once you're accustomed to the feel of a sharp knife, you'll feel the difference right away. When you do, just a few quick strokes on the steel will straighten it right out again, without having to grind away any more blade on a whetstone. 🎁Package Included 1x 12-inch Knife Sharpener

Price: 13.29 USD

Location: Rancho Cucamonga, California

End Time: 2024-09-04T06:00:57.000Z

Shipping Cost: 0 USD