Description: V200 Electrical System Circuit Tester Functions: 1. Power injection, measuring, ground testing, polarity checking, continuity testing and component activation. 2. Read the AVO meter, voltage, current, and resistance. 3. Energize the electrical components, such as the cooling fan, relay etc. 4. Activate the components 5. Determine the positive, negative and open circuit. 6. Test the bad ground contacts, follow and locate short circuits without wasting the fuse. 7. Test the continuity of the power switch, relay and diode. 8. Protect the tool from overload. 9. Allow you to work in the dark area by using the built-in head light. 10. Test along the vehicle by the long cable.12V 24V PowerScan Circuit Tester Probe Electrical Power AVOmeter Diagnostic Kit V200 Electrical System Circuit Tester Functions:1. **Power Integration and Diagnostics**: Inject power, measure electrical parameters, test grounds, check polarity, ensure continuity, and activate components with precision. 2. **Comprehensive Meter Readings**: Accurately read AVO (Alternating Voltage Ohmmeter) measurements, voltage, current, and resistance for a thorough analysis. 3. **Component Energization**: Safely energize components such as cooling fans and relays to verify their functionality. 4. **Component Activation**: Effortlessly activate electrical components for testing and diagnostics. 5. **Circuit Identification**: Accurately determine the presence of positive, negative, and open circuits. 6. **Fault Detection**: Locate and trace bad ground contacts and short circuits efficiently, saving time and resources. 7. **Continuity Verification**: Test the continuity of power switches, relays, and diodes to ensure optimal performance. 8. **Overload Protection**: Equipped with overload protection to safeguard the tool and prolong its lifespan. 9. **Convenient Operation in Low Light**: Work effectively in dark environments with the built-in headlight feature. 10. **Extended Reach for Vehicle Testing**: Utilize the long cable for comprehensive testing along the vehicle's electrical system. Detail Display About" V200" 1.[AC & DC Voltage Detection Mode]: Versatile Voltage Detection: Our circuit tester offers a dual approach to voltage analysis, accurately capturing the maximum and minimum voltages, supply frequency, and duty cycle in AC circuits, while precisely measuring the steady-state voltage in DC circuits, ensuring comprehensive diagnostics and efficient troubleshooting for a wide range of electrical systems. 2.[Resistance Test & Diode Test Mode]: The circuit tester provides precise resistance measurement between the probe and auxiliary ground, ensuring accurate diagnostics of circuit integrity. Additionally, it includes a rapid diode test function that efficiently evaluates the operational status of diode assemblies, confirming their conductivity and functionality. 3.[Ultra Extension Inspection Cable 6m]: The circuit tester offers 6m Exstension cable ,seamless coverage from the front to the rear of the vehicle, enabling effortless inspection and assessment of the entire electrical circuit system for thorough diagnostics and maintenance. 4.[Current Overload Protection]: The VDIAGTOOL V200 Automotive Circuit Tester is equipped with an intelligent overload protection feature that ensures the safety and longevity of your electrical testing process. In the event of a current overload, the tester's automatic disconnection of the protection circuit is designed to mitigate unnecessary damage to the tool and the vehicle's electrical system. This built-in safety mechanism is a testament to the product's commitment to reliable performance and user security Instant Self-Diagnostics Ensure peace of mind with the V200's quick self-test feature. A simple power switch action activates the tip with positive voltage, lighting up the red LED and displaying the battery voltage. Reverse the switch for negative voltage, and the green LED confirms with a 0.0V reading, verifying the tester's readiness for accurate circuit analysis. Illuminated Operation: The built-in light on the circuit probe tester automatically illuminates upon power-up, providing a hands-free, well-lit workspace. This feature is invaluable in dimly lit areas such as under the steering wheel, eliminating the need for a separate flashlight and enhancing your ability to perform precise electrical inspections. Versatile Power Options Designed for convenience, the power probe circuit offers dual charging modes, compatible with both the car's battery and cigarette lighter. This flexibility eliminates the need for additional batteries or cables, ensuring uninterrupted use and making the V200 an indispensable tool for on-the-go electrical diagnostics. Important Note To prevent personal injury or damage to vehicles or the test Tool, read this instruction manual first and observe the following safety precautions whenever working on a vehicle: 1. Always perform automotive testing in a safe environment. 2. Wear eye protection that meets ANSI standards. 3. Keep clothing, hair, hands, tools, test equipment, etc away from all moving or hot enging parts. 4. Operate the vehicle in a well ventilated work Area: Exhaust gas are poisonous. 5. Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests. Use ectreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These component create Hazardous voltage when engine is running. 6. Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure the parking brake is engaged. 7. Keep a fire extinguisher suitable for gasoling/ chemical/ electrical fires nearby. 8. Don't connect or disconnect any test equipment while the ignition is on or the enging is running. 9. Keep the tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the test tool, when necessary. 10. When the power switch in the tool is depressed, battery current/voltage is conducted directly to the tip which may cause sparks when contactiong ground or certain circuits. Therefore the tool should NOT be used around flammables such as gasoline or its vapors. The spark of an energized tool could ignite these vapors. Use the same caution as you would when using an arc welder.PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept Credit cards、Debit card、Apple Pay、Google Pay、PayPal ect. payment. 2.Please contact us if you need to use another method to pay. 3.Payment should be made within 7 days after bidding ends. 4.Otherwise an Unpaid Item case will be opened to you. 5.We are not responsible for buyers’ local taxes. 6.Please include your special requests in eBay note if there is any. 7.We reserve the final right of sellingDelivery details Order will be shipped within 1-5 business day after payment confirmed. We have warehouse in US，HongKong，China warehouse. From our US warehouse via UPS or DHL eCommerce shipping Delivery time varies from 2 to 6 business days. From our Hong Kong warehouse via DHL or FedEx Ground Delivery time varies from 7 to 21 business days. From our China warehouse For US buyers, we use SpeedPAK (Delivery time is 8-15 business days) or express delivery(Delivery time is 7-21 business days) . For other countries' buyers, we use SpeedPAK or China Post or Hong Kong Post(Delivery time varies from 10 to 30 business days)or Express delivery(Delivery time is 7-21 business days). We will ship according to your eBay address. Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of sales We are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories. Please contact us firstly when you need warranty service. In case an item arrives faulty, please contact us in 30 days and keep it unused. We will instruct you on how to return and get refund or replacement. If after 30 days, or the item has been used, we have the right to decline your claim. Items should be returned on buyers' cost for repair or replacement.About us Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. We are authorized first class distributor of VDIAGTOOL. What Do We Have? We have office and warehouse in CN and US to ensure fast shipment and after-sale service. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Price: 59.99 USD
Location: New Jersey
End Time: 2025-01-02T16:53:21.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: VDIAGTOOL
Manufacturer Part Number: Does Not Apply
Item Length: 2.8cm
Item Width: 4.7cm
Item Height: 17.8cm
Item Type: Electrical System Diagnostic Tester
Material Type: plastic
Function 1: Car Circuit Tester 2023
Function 2: Auto Battery Diagnostic Tool
Function 3: DC/AC Voltage Circuit Tester
Function 4: Test the continuity of the power switch
Function 5: Activate the components
Function 6: Digital Electric Circuit Tester
Function 7: Protect the tool from overload
Warranty: 1 Years
Volt: 12V-24V
Accessories: Carrying Case, Clamps, Probes, User Guide
Vehicle Type: Passenger Vehicle, Heavy Duty/Commercial, Motorcycle
Features: Analog Display, Digital Display, Continuity Testing, Relay & Component Testing, Voltmeter, AVOmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester, bad ground indicator
Country/Region of Manufacture: China
Display: TFT color display (168x 128 dpi)
Model: VDIAGTOOL V200
Applicable Regions: Global
Extension Cable: 20FT/6 Meter
Resistance range: 0 – 200 KΩ
Shipping: US STOCK, 3-5 Days Delivered
Operating Temperature: 0℃ to 60℃ (32℉ to 140℉)
Circuit Breaker Rating current:: 1 – 10 Amp
Accessories 2: 20ft extension cable, Cigarette Lighter Adapter
