22.5W Power Bank Box Quick Charging 6x18650 QC PD Power Bank Shell DIY Shell Kit

Description: Features:1. [Supports fast charging] The upgraded 22.5W is fully compatible with the fast charging protocol, and any single port output supports fast charging. It is suitable for iOS PD20W, Huawei fast charging 22.5W, and multi port output 5V3A (MAX) integrated with QC2.0/QC3.0 to output the fast charging protocol QC3.0.2. [No welding required] Simply install a 6 * 18650 battery and use it. The motherboard/wireless ring and other components have been installed and soldered, so manual welding is not required. (18650 batteries, please use high-quality ternary lithium batteries. Do not use damaged or old batteries. When installing, pay attention to the reverse polarity of the positive pole and do not install it upside down. Installing it upside down will cause the motherboard to burn out and cannot be used!!!)3. [Dual screen display] Precise display of remaining power, real-time display of output voltage and current, with clear values at a glance.4. [Wireless Charging] Supports wireless charging for mobile phones. All models that support wireless charging are compatible, with a sensing distance of up to 10mm. Wearing a phone case also allows for wireless charging (note: too thick a case won't work)5. [Applicable scenarios] Home/Outdoor sports/Camping/School/Office, etc. Attention:1. This shell installation cannot be disassembled again. After installing the battery, please ensure that the product can be used normally before installing the shell.2. For first-time use, the fast charging version requires installing the battery and first charging it to activate it before it can be used normally (even if the installed battery is charged). The wireless charging function needs to be turned on by long pressing the power button for 5 seconds.3. 18650 batteries, please use high-quality ternary lithium batteries. Do not use damaged or old batteries. When installing, pay attention to the reverse polarity of the positive pole and do not install it upside down. Installing it upside down will cause the motherboard to burn out and cannot be used!!!! Specifications:Supports current and voltage display, supports battery level displayUSB output: 5V/4.5A, 9V/2A, 10V/2A, 12V/1.5A;Type-C port output: 5V/3A, 9V/2A, 10V/2A, 12V/1.5A;Type-C input: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A; For IOS port input: 5V/3A, 9V/2A, 10V/2A, 12V/1.5A;Wireless charging output: 15WCompatibility: mobile phone+tabletBoard end conversion rate: ≥ 90%Charging interface: USB output port/TYPE-C/PD input/output port, for iOS input port, wireless charging. Fast charging specifications:1. Any single port output supports fast charging, for iOS PD20W, Huawei Super Fast Charging 22.5W, and most mobile phone fast charging protocols in the market. Multi port output 5V3A (MAX) integrated QC2.0/QC3.0 output fast charging protocol QC3.0 integrated FCP input/output fast charging protocol integrated AFC input/output fast charging protocol integrated SFCP input/output fast charging protocol integrated MTK PE+1.1&2.0 output fast charging protocol integrated USB C DRP protocol, supporting input/output fast charging compatible with BC1.2, for iOS, and Samsung mobile phone fast charging.2. Integrated USB Power Delivery (PD2.0/PD3.0) protocol supports PD2.0 bidirectional input/output protocol supports PD3.0 input/output, PPS output protocol supports 5V, 9V, 12V voltage range input/output, PPS supports 5-11V, 20mV/step output voltage range integrated hardware bidirectional labeling and decoding (BMC) protocol integrated physical layer protocol (PHY) integrated hardware CRC supports Hard Reset. Packaging list:1 * 18650 battery charger box On May 19, 2024 at 20:16:25 PDT, seller added the following information:

Price: 21.22 USD

Location: Rowland Heights, California

End Time: 2025-01-20T03:53:23.000Z

Shipping Cost: 0 USD