3 Axis NEMA 34 Closed Loop Stepper Servo Motor 4.5Nm 4N+Driver+60V DC Power Kit

Description: 【USA Stock & Fast Shipping】3 Axis NEMA 34 Closed Loop Stepper Servo Motor 4.5Nm 4N+Driver+60V DC Power Kit Good News: We have USA Warehouse in USA,so we will ship this product from USA to you Package: 3x 85HSE4N 4.5N.m Closed-loop servo motor 82mm 3x 2HSS86 servo driver3x 3M Extension cable3x 400W 60V DC Switching Power Supply Nema34 4.5N.m Closed Loop Servo Stepper Motor & 2HSS86 Servo Driver CNC Kit About this item♞【Motor specifications】Holding Torque:4.5N.m; Current:6A; Peak current:8.0A; Phase:2; Size:86x86x82mm; Step Angle(degrees):1.8 degree; Motor Lead Wire: 4-wire; Encoder lines:1000♞【2HSS86 Driver】2-Phase Hybrid Stepper Servo Driver; Frequency:0-200KHz; Insulation resistance:>=500MΩ; Voltage: AC 24-70V or DC 30-100V input;♞【Advantages】Stepper motor closed loop system,never lose step; The stepper motor control has a new generation of 32-bit DSP. The vector control technology can ensure the accuracy of the motor; Improve motor output torque and working speed; Automatic current adjustment based on load; Pulses response frequency can reach 200KHZ; 16 kinds microsteps choice,highest 51200microsteps/rev.♞【More Functions】It supports over-current protection, over-voltage protection, position outside the tolerance protection.The build-in place in position and alarm output signal can help the upper monitor to monitor and control,the function of position ultra difference alarm can ensure the machine work safely.♞【Widely used】Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so on.This motor driver kit fits all types of machine load conditions (including pulley and low stiffness pulley) without adjusting the gain parameters. OverviewThis is the nema 34 series hybrid stepper servo kit. The 2HSS86 driver adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor.The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor.The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.Nema34 Closed loop servo motor 4.5N.m 82mmSize:86x86x82mmCurrent :6.0APhase:2Step Angle(degrees):1.8 degreeLead wire:4pcsHolding Torque:450NcmResistance:0.44±10%ΩInductance:3.7±20%mHInsulation resistance:100MOhm(500V DC)Insulation Class:B The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system,besides that,it also have some function of AC servo motors.Voltage range: AC24-70V or DC30-100VPeak current :Peak 8.0ALogic input current:7-20mAFrequency:0-200KHzSuitable motor:86HSE156,86HSE118, 86HSE82Encoder lines:1000Insulation resistance:>=500MΩOperating temprature:0~50℃Operating humidit:40~90%RHVirbration:5.9m/s2Max1.2.1 Stepper motor closed loop system, never lose step.1.2.2 Improve motor output torque and working speed.1.2.3 Automatic current adjustment based on load1.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter.1.2.5 Drive nema 34 series closed loop stepper motor.1.2.6 Pulses response frequency can reach 200KHZ1.2.7 16 kinds microsteps choice, highest 51200microsteps/rev.Over-current,over-voltage and position ultra difference protection function.Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, graph plotter, cnc machine, automatic assembly equipment and so onWiring diagram Connection instructionL: Live wireN: Negative wire+V: DC power output “+”-V: DC power output “-“+V ADJ: output voltage regulationHigh quality casingAdopting high-quality shell,with better heat dissipation performance of the radiator,the power supply lasts for a long time and has a long service life.Pure copper transformerEnough widing coils ensure pure copper,reliable performance,sufficient power,and stable work.LED pilot lampDetails determaine qualityNote:Please must be selected by switch to choose 115V/230V input before using to avoid damaging. Descriptions:Output voltage: 60V DCOutput Frequency:85%Output Current:6.6AInlet/Load stability:±0.5%DC voltage of Adjustable range:±10%AC input voltage range: 110V/220V ±15% (Switch Selection) (95-120V or 220V-240V)Overload protection:105%-135% hiccup mode,auto-recoveryOver-voltage protection:115%-150% rated output voltageWorking temperature-10℃～+50℃Output Power:400WProduct Weight: 1kgApplications Application in industrial automation control, LCD,LED lighting, medical equipment, CCTV,computer chassis, security, mechanical and electrical equipment,instruments, solar photovoltaic power supply,Servo Motor,Stepper Motor,Foaming Mill Cut Laser Engraver Plasma etc and other fields. Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment. Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedback Refund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost Contact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.

Price: 270 USD

Location: TX

End Time: 2025-01-21T08:29:12.000Z

Shipping Cost: 30 USD