30 CC WIDE AS GR Gray Foam Pads White Base + 30 Brown Felt Pads 8-track tape

Description: Restore Your Own- 30 EZ Peel & Stick Classic Brown Felt Spring Pads for 8-track tapes that have metal spring pads. Comes in the 3 standard sizes for all felt replacement tapes. 10 Small, 10 Medium and 10 large. Restore Your Own - Brand New 30 Center Cut Wide Anti-Static Graphite Resistant Clear Top Flex-Thin Soft CHARCOAL GRAY Foam Pads with a white plastic base. 5/16" Foam Pads for your 8-track tape restorations. These pads offer a graphite resistant anti-static very slick thin flexible clear top film which helps to resist graphite build-up giving you a clearer crisper sound plus better contour around your player audio head for great sound and less resistance on the pull going across the audio head and players motor. Flex contours around your player's track change solenoid offering a great track change while the foam pads top layer gives the audio tape enough resistance to help prevent double or even triple track changes from more sensitive track change solenoids. Because they have a white plastic base just insert them into your cartridge. These foam pads are in the wide version which are often used on CRC, CBS, mid 70's + GRT's or any cartridge that requires a wide foam pad and will line up evenly with the bottom base's edge inside the foam pad cartridge chamber for a perfect fit. If this foam pad should overlap the bottom edge of the base of the foam pad chamber the 30 count CC Narrow Anti-Static Graphite Resistant Gray Foam Pad with white plastic base will be needed and will fit evenly with the edge of the cartridge chambers base for a perfect fit. Directions for foam pads: Remove old original foam pad with long tweezers, only opening the top of the cartridge area first if possible and then inserting the new one after removing the old one, be sure to clean the old foam pad residue left off by the old foam pad with alcohol and a Q-Tip, making sure not to get any inside the cartridge before inserting the new foam pad. DIRECTIONS FOR FELT PADS: Remove the old, dried glue off the spring pad (if any) by lightly rubbing or scraping it off with an alcohol-soaked Q-Tip or a very small flat head screwdriver. Then apply the EZ Peel & Stick Felt Pad by peeling off the paper behind the felt pad. Then with your tweezers grab a side of the felt pad as close to the edge as possible (try not to grab the adhesive below the felt edge) then line up the felt corners (on the opposite side of where you are holding the felt pad with the tweezers) to the two corners with the metal spring. Then press it down on the metal spring once the two corners of the felt pad and the two corners of the metal spring are all aligned. The adhesive on the peel & stick is very sticky so please be sure to lightly place on copper spring and lightly set till it is square before pressing hard into place. NOW SHIPPING FIRST CLASS MAIL INTERNATIONAL!!! PURCHASE UP TO 3 ORDERS OF 30 CC WIDE AS GR Gray Foam Pads White Plastic Base + 30 Brown Felt Pads FOR THE SAME SHIPPING PRICE. Because these foam and felt pads are all manufactured per order, please allow up to 3 business days before your package ships.

Price: 23.99 USD

Location: Houston, Texas

End Time: 2024-09-24T00:05:50.000Z

Shipping Cost: 4.25 USD