Description: I am selling a lot of 3 LED flashers or controllers with 3x cigarette plugs that came out of a sho me able2 products led dash / deck light. The cigarette plug has 3 wire to the PCB - red is 12v positive, black is 12v negative, and yellow is the trigger wire connected to the momentary switch to change flash patterns. The cigarette plug has 2 buttons - one with an indicator LED that lights when switch is turned on and a second momentary for pattern selection. The cord from the plug to the PCB Flasher board is 9.5 feet long, great for a minibar, deck, dash, or grill emergency warning light; the cig plug is not speed tech but I never liked the connector in the middle of their harnesses. Wire colors are the same between the plug and pcboard. The PCB has 2 outputs with red and black wires; black is negative and red is positive to your LED lighthead. Wires are soldered directly to the board, but I am including a few inches on each wire lead so you can solder or crimp to your lightheads. The flasher has multiple flash patterns and is compact at only 2inches by 1 inch; my favorite flash pattern is a triple flash alternate that changes to single flash alternate or another pattern that randomly selects from all other patterns. Once you find a pattern that you like, you let run for a few cycles and then turn the switch off; the next time you turn on the board, the flasher remembers the selected pattern. I used these to repair Whelen avengers, Whelen talons, Federal Signal Vipers, Code3, SVP, LED Equipped, and LED Outfitters dash and deck lights, especially since none of these manufacturers sell the PCB board directly. These will also work for China LED lights such as Nilight, Xprite, and ASPL, really any 12V led lighthead. All controllers are tested and like new condition and can run 2amp/24 watts per lighthead (fused at 5amps); if you look at your LEDs, they are rated at 0.5, 1, 3, 4, or 5 watts per LED times the number of LEDS you want on each channel. Much cheaper than buying a new LED dash or deck light and you have a lot more patterns. I used to sell these for $60 each to replace flasher in a $240 light, now selling out my stock at a bulk discount and buy 1 kit get 2 more kits free, total 3cig plugs and 3flashers. I am now also offering free shipping in the USA! Thanks for checking my listing!
Price: 34.99 USD
Location: Rockaway, New Jersey
End Time: 2025-01-04T02:35:46.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Color: Black
Manufacturer Part Number: Does not apply
Ballast Included: No
MPN: Does Not Apply
Placement on Vehicle: Front
Suitable For: Light Bar
Brand: Unbranded
Designer/Brand: Unbranded
Type: Strobe Light
Manufacturer Warranty: Seller Warranty
Voltage: 12V 24V
Country/Region of Manufacture: China
Lighting Technology: LED