4 U-Joint Half Drive Shaft Axle CVD Inferno MP7.5 MP777

Description: MP7.5 777 parts in our eBay store Description ----------------------------------------------------------------------------------------- NO COMBINE SHIPPING DISCOUNT Outside USA and Canada SINGLE payment with Paypal by air !!! -------------------------------------------------------------------------- IF COMBINE SHIPPING S+H US$45.99 by Xpresspost !!! This Auctions Has 4 Pcs Slider Shaft F.R Full Set Everything in the picture is included Compatible with Kyosho MP7.5 and MP777 U-Joint Slider Half Shafts Front/Rear Axles/ Swing Shafts/ CVDs Fits Kyosho Inferno MP7.5/ MP777 Frustrated by the typical design of the metal "dog-bones"? Feeling that the full potential of your E-Maxx T-maxx has been limited? Reading about all the great features the Slider Half Shafts have but too bad they are not available in steel? Well, here is your solution! With our break-through design of Steel U-joint Slider Driveshafts, we've made everything possible. (sample picture: Notice there are two Universal-joints in each Slider Half Shaft) [The MP7.5 is NOT included in this auction] Steel U-joint Slider Half Shafts Pros Cons Made of Steel (Harder & Stronger) -- Long Durability -- Flexible driveshaft length (20mm) to improve steering and shock absorption 25mm of shaft coverage to ensure shaft will not fall out -- One Piece Design** -- wobble free -- Duplex Universal-Joints for Friction-free power transmission -- Prevent deadlocks / bindings / break-off at Joints -- Typical "Dog Bone" Drive Shafts Worn-out shaft Pros Cons Made of Steel (Harder & Stronger) Generate a lot of friction at drive cup (deadlocks could occur in some rare occasion) Long Durability Pins and Drive Cup wears out quickly 1 Angled U-joint 5mm of sliding gap, may slip off under certain conditions. -- TWO Piece Design (Notice the the center of the shaft is warped with a connector), this could lead to slight wobbling of the wheel Joint / Connector Upgraded (removed Original Cup) Original (Sample picture of shafts installed in Savage 21) Steel U-joint Slider Half Shaft Typical Dog Bone Pros Cons Pros Cons Curved-Joint Connector (enhances strength to prevent break-offs) -- Made of Steel Angled U-joint Uses Duplex U-Joint (smoother-movement) -- Can withstand a reasonable amount of torque Tube shaped joint Angled connectors (further enhance joint strength) -- Long durability Paralleled connectors Tolerate high torque -- -- -- 2.0mm Harden Pin -- -- -- Made of Steel -- -- -- Enhanced durability -- -- -- Slider Half Shaft Steel U-joint Slider Half Shaft Typical Dog Bone Pros Cons Pros Cons 6 Grooves -- Made of Steel 2 Grooves Distribute unbalanced Forces evenly -- Can withstand a reasonable amount of torque Pins and Drive Cup wears out quickly Minimize Friction -- Long durability Forces are not evenly distributed Tolerate high torque -- -- High Friction Made of Steel -- -- -- Longer durability -- -- -- Features: - FOUR High Strength Steel Universal-joint Slider Half Shaft for Kyosho MP7.5 and MP777 - Duplex U-joints to provide smoother movements and prevent deadlocks / bindings - Minimize friction - Flexible driveshaft length (20mm slider) to improve steering and shock absorption - **ONE PIECE DESIGN -- Wobble Free! (unlike typical dog bones shafts which are made of two pieces because of manufacturing cost) - Curved Joint Connectors to increase Strength and prevent break-offs - 6 grooves to secure the shaft and distribute unbalanced forces - Able to tolerate excessive torque - Shaft Length (Head to Tail) Compressed: 140mm (5.5 inches) Normal: 147mm Extended: 160mm (6.25 inches) Fully Extended: 165mm (6.5 inches) - Shaft Diameter: 5mm -- Strengthen to handle SERIOUS ABUSE - Provide support for Upper and Lower Arms - Improve performance over sharp corners - Extra protection against crashes - replacement for the original shafts - High protection and long durability - Fashionable and stylish - Light weighted (225.84g) - Provides better performance - Assembling hardware included - Computer machined 1. Original Differential box 2. Open Up 3. Open Up Differential Gear 4. Remove Inner Gear 5. Install Shaft Mount 6. Reinstall Inner Gear 7. Differential Complete 8. Install Slider Head Piece 9. Secure Shafts 10. Completed 11. Install A-arms, shocks, tower, steering blocks and etc Front Shaft item numbers: (68) IF125 Rear Shaft item numbers: (47) IF144, (40) IF119 Terms & Conditions Bidding on this auction means that you agree with the following terms & conditions. Please review our terms carefully before bidding. All pictures and descriptions are subjected to change without notice. Items may or may not look exactly the same as the auction shown. We are not responsible for any inadvertent errors. Payment Total payment = winning price + shipping & handling Example A: Winning price: $9.00, S&H: $1.00, then Total = US$10.00 Example B: Winning price: $1.00, S&H: $9.00, then Total = US$10.00 We accept Paypal There will be an extra US$0.50 the Paypal penalty fees for any insufficient Paypal payments. Shipping and Handling 1. Shipping & Handling fees includes: the shipping fee itself, eBay and Paypal commissions, packaging materials, documentation and other minor fees. 2. Please refer to the shipping chart for details. 3. APO / FPO shipping is equal to International shipping. Please refer to S&H price list above for details. 4.Combine shipping is available to buyers when the following conditions are met: ALL items are paid in a SINGLE payment Items are purchased within 2 days International Buyers: Due to high shipping outside of North America, there will be no combine shipping discount when accumlated shipping fees is below US$60.00. *note: combine shipping are charged based on the highest shipping cost of the 1st item and half of the shipping for each additional items. i.e.: Item A Shipping: $5.00 Item B Shipping: $7.00 Item C Shipping: $10.00 Then total shipping will be $10.00 (item C is highest) + $3.50 (1/2 of item B) + $2.50 (1/2 of item A) = $16.00 5. Please expect 5 to 10 business days before you receive your item(s). International bidders should expect a longer time. 6. Bounce backs due to incorrect shipping address will result in setback on deliveries. Usually it will take 45 days for bounce backs to return to us. So, PLEASE make sure you address is correct. It will be the buyer's responsibility to repay the S&H if such incident has occurred Return & Refund Policy No refunds after 30 days Shipping & handling & other service fees are NOT refundable All returned items must be in original packing. Items that are used/ damaged/ deformed or altered in any ways are not acceptable. A 20% restocking fee will be charged on all refunded items. MP7.5 777 parts in our eBay store

Price: 99.99 USD

Location: Point Roberts, Washington

End Time: 2024-12-23T03:54:07.000Z

Shipping Cost: 4.99 USD