4+2 12GSDI with 1X GenLock and 4X POE+ and 3+1 XLR over Single ST Fiber, 10KM

Description: 1. Description This 4+212G/6G/3G/HD/SD SDI TX&RX BOX are fiber optic serial digital video transmission units that offer the industry's broadest range of digital rates 12Gbps bandwidth while maintaining the signal quality that broadcasters demand. The Transmitter and Receiver support 4+2 channels 12G SDI and 1x GEN-LOCK and 4X Discrete Gbit POE+ ETH, and 3+1 Discrete XLR Analog Audio Port, over Single ST Fiber, Support 10KM fiber link. The transmitter and receiver accept 75ohm BNC input and output, converts it into an optical stream via single standard ST Fiber connectors. The transmitter BNC include equalization and reclocker for long lengths of coaxial cable, so you can use them at nearly any point in your SDI chain. The receiver receives ST fiber siganls, through reclocker and cable driver for long lengths of optical link, 10KM fiber transfer, so you can use them at nearly any point in your SDI chain. Both the transmitter and receiver modules include LED indicators to display Power On, SDI LOCK signal presence. The units support AC100-240V Power Supply. 2. FeatureSupports SMPTE 2082-1, SMPTE 2081-1, SMPTE 424M, SMPTE 292M, and SMPTE 259M (C) Serial Digital Video StandardsSupports 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, 2.97 Gbps, 5.94Gbps, and 11.88Gbps Serial Data Rate Operation; This includes the f/1.001 ratesSupports DVB-ASI at 270 MbpsInput Cable Equalization 12G: 60m, 6G：90m, 3G:130m, HD-SDI:150m SD-SDI:300m/Belden 1694AOutput Cable Reach 12G: 60m, 6G：90m, 3G:130m, HD-SDI:150m SD-SDI:300m/Belden 1694ASupports embedded audioSupport SDI IN and OUT Video Resolutions as followed: SD: 525i/59.94Hz; 625i &50Hz HD: 720p/23.98Hz &24Hz &25Hz &29.97Hz &30Hz &50Hz&59.94Hz &60Hz; 1080p/23.98Hz &24Hz &25Hz &29.97Hz &30Hz 1080sf/720p&23.98Hz &24Hz &25Hz &29.97Hz &30Hz 1080i/50Hz &59.94Hz&60Hz 1035i/50Hz &59.94Hz&60Hz 3G: 1080p/50Hz&&59.94Hz &60Hz; 6G: 4096x2160/30Hz, 4096x2160/29.97Hz, 3840x2160/30Hz, 3840x2160/29.97Hz 12G: 4096x2160/60Hz, 4096x2160/59.94Hz, 3840x2160/60Hz, 3840x2160/59.94Hz75ohm BNC input and output portSupport 4X Discrete Gigabit POE+ Ethernet(IEEE 802.af, 802.at), and auto sensing 10M/100M/1000Mbps bitrate, Each POE+ is controlled by single Switch to complete POE ON/OFFSuport one GEN-LOCK, 75ohm BNCSupport one 3+1 Discrete XLR analog audio port to complete Audio Intercom communication, SNR 90dBSuport 9pin D-SUB RS422/485, Baud rates 921600bps MAX.Single ST Fiber ReceptacleUp to 10km distance / Singlemode Fiber defaultOperating Temp.: -20 to 50 Degree CelsiusSupport Dual AC100-240V power supplyPOWER ON with "POWER LED" IndicationFiber IN with "LINK LED" indicationFans are available in the boxEach 1.5RU box with two flexible Side Ears, any connection for Side Ears fix in the front or the back of the box 3. Specifications 　DescriptionParameterTest ConditionsBNC SMPTE StandardOmniTekBNC75 OHMAgilent SystemDate Rate 270 Mbps, 1.483 Gbps, 1.485 Gbps, 2.967 Gbps, 2.97 Gbps, 5.94Gbps, 11.88GbpsOmniTekStandartSMPTE 424M, SMPTE 292M, and SMPTE 259M (C) ,DVB-ASIOmniTekCable Equalization 12G:60m, 6G: 90, 3G:130m, HD-SDI:150m SD-SDI:300mBelden 1694ACable Out Reach12G:60m, 6G: 90, 3G:130m, HD-SDI:150m SD-SDI:300mBelden 1694AJitter<0.2UI12Gbps, 100KHZEye OvershootAmplitude<10%12GbpsRise/Fall time30-800psSD,HD,3G ,6G, 12G Signal Fiber SFP Bandwidth12GbpsAgilent SystemSFP Support18channel CWDM Band 1270-1610nm　Fiber ReceptacleST Port　Fiber Distance10km DefaultSinglemode/G652DMaxmium Fiber Distance80km Singlemode/G652D/Long Wave BandFiber TypeSinglemode　Others Input PowerDual AC100-240V　Power Consumption80WNot including POE+ Power Surge ProtectYES　Operating Temp.-20to 50　Storage Temp.-40 to 80　Operating Humidity20-80%　Weight7KG/PCS　DimmensionL/W/H 430*310*68mm　Warranty3 Years Free Warranty　 4. Package List4IN+2OUT 12G-SDI With 1X Gen-Lock OUT and 3+1 Discrete XLR and 4X Discrete Gbit POE+ and DB9 RS422/485 over single ST Fiber port (1.5U RACKTransmitter *1)4OUT+2IN 12G-SDI With 1X Gen-Lock IN and 3+1 Discrete XLR and 4X Discrete Gbit POE+ and DB9 RS422/485 over single ST Fiber port (1.5U RACK Receiver*1)4PCS Side EarWe do not provide Neutrik AC Cable 5. Installation Connect the provided AC or DC power supplies to the power socket of the transmitter and receiverConnect SDI cable between the SDI video source and the transmitter BNC inputConnect SDI cable between the receiver BNC output and the SDI video monitor or SDI DVRConnect ST fiber between the transmitter and the receiver ST Receptacle 6. Notes A. No video output and some one of the three LEDs not lightedPlease check the power supply if workplease check the video source if workplease check the coaxial cable BNCs if all tightened wellplease check the ST fiber if inserted well B. There is video display, but video flashplease check the video source format if rightplease check the coaxial cable BNCs if all tightened wellplease check the ST fiber if inserted wellthis issue happens often when the ST end face is dirtyFor long range application, please check the fiber transfer link-budget, if it is too long, the received optical signal is very weak, and may be out of receiver reclocker capacity and fail to recover the useful signals 7. Warranty Thank you very much for using our products The warranty time is three years and life-long maintenance. During this period, any belongs to under normal usage circumstance cause because of the product quality’s problem of breakdown, our company will be responsible for giving free maintain Free maintain won’t be given under the following circumstance:The malfunction and damaged caused by incorrect use, the unauthorized repairs and alterationThe damage caused by fire, flood, abnormal voltage, other natural disasters and secondary product damageThe product malfunction caused by not in accordance with the user manual operationThe malfunction and damaged caused by the other barriers(man-made factors or external device)

Price: 5200 USD

Location: Shenzhen, Guangdong

End Time: 2025-01-12T04:22:41.000Z

Shipping Cost: 250 USD