433MHz Universal Wireless RF Remote Control Switch, DC 6-24V, 2 Pack

Description: 【Easy to Use】Extremely easy to set up and reset. There are 4 operating mode(momentary/toggle/latched/delay mode) can be programed. You can easily program by yourself depends on your needs. The operating mode of the product is adjustable. Press "ON" key to turn on the lights and press "OFF" key to turn off the lights.【More Flexibility】This receiver module is in mini size. The length width height is 25mm*15mm*3mm. Which make this product more easy to DIY. DC 3.6V~24V wide range voltage safety receiver. So 5V/12V/24V voltage can working well. The max current can be up to 2A. 2 wiring-terminals which make it easy to wiring.【Multiplayer Control】One receiver can store about 10 transmitters. So you can share the transmitters to family/ friends. And one transmitter can control multiple receivers at the same time. The code of the chip is EV1527 learning code which is the secure technology system. The remote control has a long service life. There is a screw port on the back of the transmitter, and the battery can be replaced after disassembly. The battery is 2pcs CR2032(included).【Long Range】 Strong signal can pass walls, floors, doors, board and so on. It can be controlled within 50 meters distance in open area. You can remotely operate every machine connect with the receiver module through the remote control.【Applications】:The wireless RF switch is a learning code wide range of applications from simple domestic remote control to autonomous control , such as DIY, LED lights, lamp beads, Christmas tree light strings, light control switches etc. Product Description 433MHz Universal Wireless RF Remote Control Switch DC 6V 12V 24V 1CH Channel Relay Wireless Secure RF Remote Control Switches Transmitter and Receiver kit Strong 433 MHz RF signal Bkiyougo RF wireless remote control switch, which uses 433MHz frequency radio frequency technology, has strong signal that can pass through walls, floors, doors, and EV1527 learning code chip which makes the system safer. You can control each device connected to the receiver module through the transmitter from any location within a reliable distance. Easy to use Extremely easy to set up and reset. Small mini size receiver module (25mm*15mm*3mm). Easy to install. There are 4 operating modes (momentary / toggle / latched mode/ delay mode). You can easily set up by yourself according to your needs. The operating mode is adjustable. Press "ON" key to turn on the lights and press "OFF" key to turn off the lights. Wide Application The wireless RF switch is a learning code wide range of applications from simple domestic remote control to autonomous control, such as DIY, LED lights, lamp beads, Christmas tree light strings, light control switches etc. 1x RF Receiver Module1x Remote Controls (included battery)1x Product Manual1x Wire Terminal Technical Data Of receiver : Input Power:DC3.6-24V Max Current:<2A Standby Current:3.6mA ~5mA RF working mode:superheterodyne Receive sensitivity: >97dbmTransmitting Decoding mode:MCU Support remote type:1527 Learning code, 2262Fixed code (Rolling code can be design) Working mode: Momentary Toggle, Latching, Time delay(5s,10s,15s,20s), Automatic energize when power on Wiring type:fixed terminal Working temperature:-20 degrees, 80 degrees software storage:20pcs distance:>50m (open space) RF Frequency: 433MHz Learning style :Learning Button Working mode: Momentary, Toggle, Latching, Delay Mode How to set the working mode? Momentary mode Press and hold on button, light will turn on; Release this button, light will turn off. Setup Press the learning button 1 times (on the receiver). Wait 3 seconds;Press one button on the remote control. To succeed. Toggle mode Press on button, light will turn on; Press this button again, light will turn off. Setup Press the learning button 2 times (on the receiver). Wait 3 seconds;Press one button on the remote control. To succeed. Latched mode Press button "ON", light will turn on; Press button "OFF", light will turn off. Setup Press the learning button 3 times (on the receiver). Wait 3 seconds;Press the "ON" button on the remote control. Wait 3 seconds.Press the "OFF" button on the remote. To succeed. Delay mode Press one button, light will turn on; The light will turn off after 5 seconds ( or 10/15/20 seconds) Setup Press the learning button 4 times (or 5/6/7 times) on the receiver. Wait 3 seconds;Press one button on the remote control. To succeed.

Price: 25.99 USD

Location: Denver, Colorado

End Time: 2025-02-10T10:45:27.000Z

Shipping Cost: 0 USD