6 in1 Car Battery Jump Starter w/150PSI Tire Inflator LED Light and Power Bank

Description: 6 in1 Car Battery Jump Starter w/150PSI Tire Inflator LED Light and Power BankFeatures:*【6-in-1 Jump Starter】The portable car kit not only works with as jump starter at peak current of 2000A, also functions as tire inflator up to 150 PSI with instant display of tire pressure, air mattress pump or deflator up to 220 L/min, LED light with 3 modes (flashlight, strobe, SOS), and portable power bank with TYPE-C cable.*【Powerful Jump Starter】Equipped with high-rate lithium battery, the jump starter can quickly and effectively start 7.5L Gas & 5.0L Diesel Engine and other 12V vehicles like motorcycles, cars, or lawnmowers. The upgraded smart jumper cable can safely start all engines with automatic protection against high or low temperatures, under voltage or over voltage.*【Accurate Tire Inflator】 The air compressor in the jump box takes just 60 seconds to inflate leaky tires from 32 to 36 PSI with accurate readings within 1% of the exact tire pressure. The air pressure reaches up to 150 PSI, offers 4 intelligent modes and nozzles to inflate: car mode, motorcycle mode ,bicycle mode, and basketball mode.*【Fast Inflation & Deflation】The air pump has a flow rate of inflation & deflation up to 350L/minute, inflate various items, including balloons, swim rings, air mattresses and even serve as a dust blower. The pump can release 220L of gas in 1 minute, which is helpful for storing your mattress outdoors, also has an deflation port that can drain the gas out of the quilt storage bag. Perfect for mattress installation and storage during car camping time.*【Power Bank & 3 modes LED Light】The jump starter features a type-C port for its charging and a 5V/2A USB output port for other devices. The built-in LED light has 3 modes: Flash Light, Strobe Light and SOS Light. It not only will be car emergency kit, but also is a good friend for camping, outdoors, emergencies and travel.*【How to Inflate & Deflate mattress】Screw the air hose clockwise into the air port named “Inflate” on the main board. Choose the appropriate nozzle and connect the nozzle to the jump starter and item. Turn on the Jump starter first, then go to click the button with the blower pattern.Press the button on the blower pattern again to end inflation. Put the air hose into the air port named “Deflate” on the main board will drain the gas out of the mattress.

Price: 125.99 USD

Location: Xiamen

End Time: 2025-01-18T17:54:02.000Z

Shipping Cost: 0 USD