Description: LED 4D White Light Front Rear Emblem Logo Badge For Ford Taurus Focus Mondeo Product Specifications: Condition: 100% Brand New Colors available: White Note: Please tell us the color you want when you place the order, otherwise we will send you at random.thanks ! The power:DC12V +/-10 Wiring length: 0.6 meter Material :LED+PVC+ABS Voltage:12V life span:more than 100000 hours Size: About 14.5cm*5.6cm Fit: Ford Taurus Focus Note: this car logo light maybe can not both fit your Rear and Front logo.because your car Rear and Front logo maybe different size. Please measure your original Rear and Front logo before you place an order! NOTES: Because the camera and light source, illuminate the sample yellow, the actual color and car brake lights of similar color, followed by sampling instructions. Installation Notes: Before you begin, prepare the following tools: 1. Flat head screwdriver 2. Phillips screwdriver 3. Insulating tape 4. Towel 5. Pliers 1. First in the box marked with a towel next to the car, with a flat screwdriver pry the car standard, shop towel is to prevent scratches the body 2. Note first double-sided tape stripping the body, when prying force moderate, do not be too fierce, little by little, slowly pry down, clean up the car body and the standard double-sided adhesive 3. Using a Phillips screwdriver to remove the inner compartment of the rear compartment, pay attention to some parts of the clamp, be careful to remove the noise board can see a variety of lines. 4. Now again to install the car standard lights, the car lights to mark the power cord through one of the car standard positioning holes, wear inside the car Tear off the car on the back of the single-sided plastic lights, while pulling the side of the car lights to stick to the car body, pressed. 5. Mark lights installed, and now the power supply. The car to be connected to the license plate lights after the license light power, so when you turn on the night light when the lights will be marked at the same time to find the license plateafter the power connector 6. First unplug the plug, positive and negative stripping a hole, revealing wire core, according to the red on the red, black and black good line, do not forget to use insulating tape wrapped, and finally plug the plug back again! Replace the rear cover noise board!
Price: 31.34 USD
Location: GZ
End Time: 2024-08-30T05:30:20.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Color: White
Manufacturer Part Number: Does Not Apply
Placement on Vehicle: Rear, Front
Brand: LED
Manufacturer Warranty: 1 Year
