6 x Engine Oil Filter PF2257G PF2257GF

Description: Home Payment Shipping About us Contact us Details PF2257G Engine Oil Filter Replacement for Chevy Cruze 1.4L 1.8L 2011-2015 GMC Canyon 3.6L 2017-2020 Buick Encore 1.4L 2013-2020 Replaces 55594651 93185674 5650359(Set of 6) Product Description Fitment:Oil filter for Buick Encore 1.4L 2013-2020,Chevy Cruze 1.4L 2011-2015,GMC Canyon 3.6L 2017-2020 and more. Reference number:PF2257G,55576499,55588497,55594651,93185674,5650359,CH10246,72260WS,57674,PS-7027,HU612/2X. Application:98% filtering efficiency,25 to 30 microns,provide clean oil to engine components.Designed five times more pressure than most engine oil after the oil reaches operating temperatures. Warm hint:If the filter is not replaced for a long time, the mechanical wear will be aggravated, and the debris and impurities which was generated during operation can not be effectively filtered,That will damage the engine.So please replace oil filter regularly. Package includes:6 x oil filter elements,6 x o-rings. Fitment GMC Canyon 3.6L V6 2017-2020 GMC Terrain 1.6L L4 2018-2020 Buick Cascada 1.6L L4 2016-2019 Buick Encore 1.4L L4 2013-2020 Pantiac G3 1.6L L4 2009-2010 Saturn Astra 1.8L L4 2008-2009 Suzuki Swift+ 1.6L L4 2009 Chevy Aveo/Aveo5 1.6L L4 2009-2011 Chevy Cruze 1.4L L4 2011-2015 Chevy Cruze 1.6L L4 2017-2019 Chevy Cruze 1.8L L4 2011-2015 Chevy Cruze Limited 1.4L/1.8L L4 2016 Chevy Equinox 1.6L L4 2018-2020 Chevy Malibu 1.8L L4 2016-2020 Chevy Sonic 1.4L L4 2012-2020 Chevy Sonic 1.8L L4 2012-2018 Chevy Trax 1.4L L4 2013-2020 Chevy Colorado 3.6L V6 2017-2020 Feature Complete filtration of engine oil, which ensures high performing fuel injectors and long engine life.Optimally screening out 98% of abrasives such as such as carbon, sand, dust and bits of metal before they get into your oil.Helps protect against engine wear.Protect your engine and keep your emissions control systems working properly.Proven protection for up to 10,000 miles.Cartridge element with pleat media. Installation Preparation Warm up the engine for a few minutes, park the vehicle on a level surface and then turn off the engine.Open the hood, twist off the oil filler cap in the counter clockwise direction and lift up the yellow handled dipstick a few inches.Slide under the car with your oil catch basin. Drain oil Raise the vehicle.The oil drain bolt is located at the rear of the gray metal oil pan next to the exhaust pipe.Loosen the oil drain bolt with the 10mm socket and ratcheting wrench by turning it counter clockwise.Allow the old oil to drain out for at least a few minutes then reinsert the oil drain bolt,tight about 14 Nm (10 Ft lbs) of torque. Change element The black plastic oil filter housing is located on the driver side of the engine near the oil filler hole and below some hoses.Loosen the oil filter cap with 24mm socket to the 1/2" drive ratcheting wrench.Pull the old filter and o-ring out of the cap.Snap the new cartridge filter in to the bottom of the cap.Push the new o-ring down to the bottom of the threads,lubricating it.Tighten the cap about 25 Nm (18.5 Ft lbs) of torque. Payment Method Shipping Policy Returns Policy About us Contact us Payment Delivery Details Returns Policy [RETURN_POLICE] About US Contact US Home Payment Shipping About us Contact us

Price: 22.49 USD

Location: Walton, Kentucky

End Time: 2024-03-10T18:05:04.000Z

Shipping Cost: 0 USD