6.0L LQ9 LS Engine with 2WD 4L80e and NEW Stand Alone Swap Harness PCM LQ4 DBW

Description: This is your LS swap in a BOX! 6.0L High output LQ9 and 2wd 4L80e transmission. Includes belt driven accessories, a brand new stand alone swap harness and PCM. Pulled from a running and driving 2003 Cadillac Escalade with 196329 miles. The transmission was pulled from a 2006 Chevy Express Van with 187478 miles. Look at the pictures carefully. What you see is what you get. LQ9's are one of the best LS engines for swap projects. They have higher compression flat top pistons (10.1:1), heavier connecting rods, and a larger camshaft. This would make a great engine for a street rod or as a foundation to build on. This LQ9 has all it's belt driven accessories.Includes all accessory mounts, motor mounts, tensioners, power steering pump, alternator, water pump and AC compressor. This engine is drive by wire. The fuel rails on the intake are setup for a return style fuel system and include the injectors. The motor has been thoroughly inspected. There are no broken exhaust manifold bolts. The oil pan, windage tray and oil pickup tube were all removed to inspect for damage and then re-installed. Because of this the oil pickup tube O-ring will need to be replaced before running the engine. The 4L80e includes the torque converter with the flex plate and the rear slip yoke. This transmission was rebuilt and has close to 60K miles on it since the rebuild. The company I get these from punches a hole in the transmission pan to drain the fluid. So you will need a new pan before using this transmission. Because of the mileage on these they are being sold as rebuild-able cores. Even though they could be installed as is. This includes a brand new stand alone swap harness with a fuse block and relays that will connect to both the engine and the transmission. I'm also including a used PCM. The PCM will NEED programming before it can run this engine and transmission. I ship with Fastenal Blue Lane Freight. Everything will be fully crated. I will ship this to your local Fastenal store for pickup. Your local store will use a forklift to get you loaded. Please look at the last picture of a map in this listing very carefully. I can only ship this to a Fastenal store in the "East Zone". I can NOT ship this with Fastenal to a location in the "West Zone". If you need this shipped to an address in the "West Zone" you will need to arrange other freight on your own. After you check out I will need the zip code of the Fastenal store you would like this sent to. I will also need the name and phone number of the person who will be picking it up. Your local store will need ID to verify the identity of that person. If you have any questions please feel free to ask.

Price: 4295 USD

Location: Sligo, Pennsylvania

End Time: 2024-09-15T00:18:53.000Z

Shipping Cost: 350 USD