6V 12V Smart Automatic Battery Charger Maintainer Motorcycle Car Trickle Float

Description: Features: 【6V/12V Smart Switch】Automatically identify and switch the 6Volt or 12 volt battery without manual adjustment, and damage the battery. 【Battery Pulse Repair】Built-in advanced battery REPAIR technology, helps to restore the old/idle batteries lost performance and extend battery life. 【Full of Self Stop】The charger clip clamped to the battery , the red"+",the black"-"electrode , dont need adjustment, the CPU is precisely controlled and the multipule protections are fully automatic stop so you can use it at safe 【Safer Alligator Clip】Rugged and durable, alligator clip wrapped in insulating material.The use of international standard pure copper wire can output current stably, even if the charging wire is used for a long time, it will not generate heat and is not dangerous. 【Flame Retardant Shell】The use of ABS Flame-retardant shell has features of fireproof, anti-electric shock, anti-corrosion, strong. 【LCD Display Screen】Digital readout LCD screen displays charging status, battery voltage/current, battery status clearly, provide visual feedback and diagnostic information even when in maintenance mode.You can read the voltage, current and charging process clearly, even in dark situations. 【Lighter But Quicker】: Our fully automatic smart trickle charger features 6 Stage smart charging mode the charging speed is much faster than another 1A automotive battery charger, Its not only a trickle charger, but also an advanced battery maintainer. Moreover, its very lightweight for carrying to charge everywhere with zero overcharge worries. 【Widely used】:Portable car battery charger 2-Amp, designed for 6volt and 12volt lead-acid automotive, marine, and deep-cycle batteries suited for cars, motorcycles, lawn mowers, ATVs, lawn tractors, trucks, SUVs, boats, and more. ➤NOTE: Lithium Battery Disabled SMART FEATURES √ 6V/12V smart switch √ Backlit LCD display √6 Stage Charging √TLK hanging charging mode √Multiple Safety Protection √Pulse Repair √All-in-one battery solution as battery charger, battery maintainer, trickle charger, plus battery desulfator Specification: Input voltage: AC: 110-220V 50-60Hz Output line length: 6.6ft Output voltage: 12V-14.8V/6V-7.4V Input power: 30W Output current: DC: 12V1.5A/6V1.5A Scope of application: 6V / 12V 2Ah-20Ah lead-acid battery (Lithlum battery is prohibited) How to Use 1. Check whether the battery parameters match the charger; 2. The red clip is connected to the positive pole(+) of the battery and the black clip is connected to the negative pole (-) of the battery; 3. After the positive and negative poles are connected, the LCD screen will light up, and the battery voltage and remaining capacity will be checked at this time (refer to the figure below） Note: After the battery is used, it needs to be left for one hour. Safety Warnings 1. Lithium batteries are prohibited to use, for 6V & 12V lead-acid batteries charging only. CAN NOT charge totally dead batteries (OV or bad cells contained) 2. Contact us for replacement if you found the charger is abnormal or the plug and power clips are damaged or cracked. 3. Stop charging if the battery is damaged or liquid overlow around your battery. Stop the charging immediately if you found the battery is overheated. 4. Charging the batteries in the vehicle is not allowed, which may result in damages of car electronics. 5. Do not expose the pump to rain or water of any kind. 6. The charger is forbidden to cover, the battery is forbidden to be inverted and skewed, and should be placed upright and straight during charging. 7. Keep the product away from fire, flammable or explosive materials during charging. Package Includes: 1 x Battery Charger 1 x DC Output Cable with Clip Connectors 1 x DC Output Cable with Ring Connectors 1 x Instruction Manual

Price: 17.77 USD

Location: Fountain Valley, California

End Time: 2024-08-27T02:21:02.000Z

Shipping Cost: 0 USD