8' Blast Cabinet Media Hose Replacement. Metering Valve Harbor Freight Sandblast

Description: Need replacement or extra blast media hose for your Harbor Freight or other siphon based blast cabinet? This 8 ft. long section of our 1/2 inch ID 3/4 inch OD reinforced media hose is the perfect solution. Measures approximately 8 feet long and features braided reinforced construction. This is much more flexible than the stuff you find at the local hardware or big box store. We have found it to be the perfect combination of durable and flexible. No hose clamps or grommet are included with this product. For more details click or tap the "See full description" link below This abrasive blast cabinet metering valve combines great performance and a great price! Eliminating the drain plug from the design reduces costs and improves media flow. There’s no messy drain plug to struggle with or lose and less area for internal restrictions. You can still empty media by lowering the door as you've always done. The smoother design naturally funnels media into the valve. I even take the time to mill a bevel on the internal edge of the connections near the hose to further improve flow. Features: Durable metal construction. Permanent rust preventative coating. Sealed connections. Easy install. Full size 3/8” air inlet valve offers easy toolless adjustment. Purchase includes metering valve and instructions only. Click or tap “See full description” below for more info 8' of Replacement Blast Cabinet Media Hose Length of our 1/2" ID Blast Cabinet Media Hose Measuring Approximately 8 Feet LongFiber Braid ReinforcedDurable and FlexibleSemi Translucent Design Allows You to Asses Media Flow VisuallyFree ShippingHose Only - Does Not Include Metering Valve, Blast gun, Hose Clamps or GrommetThe blast hose fitting on the stock triggered Harbor Freight (and similar) blast guns is a little larger than 1/2". This hose WILL fit. You simply need to heat the end of the hose a little to soften it. It will then push over the fitting. Need replacement media hose for our Harbor Freight Sand Blast Cabinet Metering Valves? Need to upgrade or improve the abrasive media hose in your siphon style blast cabinet with a durable and flexible hose? No problem! This listing is for one 8' length of our 1/2" ID - 3/4" OD Blast Media Siphon Hose. This media hose is the same fiber braid reinforced hose supplied with our Harbor Freight style blast cabinet metering valve upgrade kits. Please note this hose is intended for supplying abrasive blast media within your blast cabinet setup. We do not recommend using this for supplying compressed air. Use a dedicated pneumatic air hose designed for that purpose. This hose is durable and more flexible than the stuff you'll find locally. Your purchase includes 8' of hose only and does not include any grommets, hose clamps etc. Remember, blast media hose is a consumable item. Eventually it does wear out from the inside out and needs replacing. It never hurts to have extra hose on hand! If you're using the stock triggered blast gun that came with a Harbor Freight or similar blast cabinet this hose is a tight fit. It WILL fit. The fitting on most of the triggered guns is usually a little larger than 1/2" and closer to 5/8". You just need to heat the end of the hose with a heat gun. Once softened, you can force the hose over the fitting. Another option is modifying the blast hose fitting on the stock gun. Heating the hose is much faster and easier. Why not just use 5/8" ID blast hose? You can. We also sell 5/8" ID hose. Check our ebay listings. We prefer using 1/2" ID hose since it is less bulky and offers better flexibility and good performance. All of our metering valves and most aftermarket blast guns are set up for 1/2" ID blast hose. FREE SHIPPING: Free shipping is valid for US Customers only. Free economy shipping will be via the carrier and service of my choosing. Slightly faster shipping may be offered for an additional fee. Please review shipping options at checkout. Returns:I generally don't accept returns on items that have been used, modified etc. In the event I do accept a return I can offer exchange or your money back. Return shipping costs are typically the responsibility of the buyer, unless I've made a mistake etc. Feel free to contact me with any questions or concerns!

Price: 19.99 USD

Location: Toledo, Ohio

End Time: 2024-01-11T19:30:15.000Z

Shipping Cost: 0 USD