80W 35x24in Autofocus Laser Engraving Cuttering Machine Built-in Water Tank US

Description: Descriptions: This machine is a laser engraver system with a CO2 laser tube. It can be used to engrave on materials such as wood, bamboo, plexiglass, crystal, leather, rubber, marble and glass. It is the most suitable and preferred equipment for advertising, gift, footwear, toys and other industries. It supports many graphic formats such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI and so on. When changing the device's settings for design files, you must connect the device to your computer with a USB cable. You can transfer files to the device using a USB memory stick or download them directly from your computer to the device using a USB cable. Even in the same task, you can set up different colors in the software and also punch holes. It also allows you to separate the legs from the main body of the machine. The door of the machine can be opened to accommodate larger materials. All laser engravers cannot engrave and cut metal. NOTE: After 3-4 hours of work, take a break of about 30 minutes. FEATURES: 1.WIDE COMPATIBILITY Equipped with Ruida DSP control system and Ruidaworks V8 (also compatible with CorelDraw/AutoCAD), this device supports multiple graphic formats, including HPGL, BMP, GIF, JPG, JPEG,DXF, DST, Al and more. This device is compatible with Windows 2000, Windows XP, WIN7, WIN8, WIN10 and Vista. If you use Lightburn software, the device is also compatible with macOS 10.11 and above (64 bit only). 2.AUTOFOCUS Autofocus -can focus automatically without having to measure the focal length manually. Both the autofocus and the lift table are controlled via the control panel. 3. BSEALED CO2 LASER BEAM The sealed C02 laser beam has a power of 80W and a wavelength of 10.6 µm. The improved mount generates stable laser beams for faster cutting speeds and extended life. 4. ALIGNED WORKSPACE 35 "X24"( 600mm x 900mm ) engraving area with integrated through-holes allows you to engrave longer objects easily. 5. SYNCHRONOUS GEAR For the running parts of the equipment, we use synchronous gears, which have higher precision, lower belt wear and higher drawing speed. 6. ELECTROMAGNETIC AIR PUMP A well-known brand of external electromagnetic air pump for engraving machine. The external air pump has higher air pressure and sufficient air volume, which can better protect the lens and have better flame retardant effect on the engraving material. 7. SEPARATE HOLE FOR INTERFACE The USB transmission interface has separate holes, which do not interfere with each other, do not make the device work and improve the user experience. 8. HIGH PRECISION LASER HEAD The industrial-grade laser head delivers a stable laser beam over the long life of the machine, while the red dot pointer indicates the engraving point and marks the path of the machine, enabling effortless project setup. The integrated exhaust system cools and ventilates the machine, removing potentially hazardous debris such as smoke and flammable gases. 9.TWO-WAY PASS-THROUGH The two-way pass-through feature is available on all of our machines. This allows you to cut materials larger than your bed size by pushing them through the engraving table. 10.EASY TO MAINTAIN Conveniently placed access doors on both sides of the machine allow you to make repairs without extra effort. 11.EXTERNAL EXHAUST FAN The external exhaust fan and the engraving machine work independently and do not interfere with the operation of the engraving machine. It has the functions of dust removal and fume extraction and has a long service life. The external exhaust fan has larger turbine and sufficient air exhaust. 12. 1250 mm laser tube The length of laser tube is 1250mm,outer diameter 80 ± 2mm.The laser tube is installed in the device itself,no need to reinstall and debug,it is more convenient to use . Specification: Model: KH-9060 1. control system: DSP 2. total power: 1000W-1500W 3. working humidity: 5% -95% without condensation. 4. operating temperature: 5-50 degrees Celsius 5.laser type: CO2 sealed laser tube 6.laser power: 80W 7.laser working principle: high voltage discharge excited highly concentrated CO2 gas to produce a laser with a wavelength of 10.6 µm 8.drive type: digital stepper motor partition driver 9. working motor: 57hybrid stepper motor 10. engraving area: 600mmx900mm 11. workbench adjustment: electric up and down 22cm 12.positioning accuracy: ± 0.01mm 13.resolution: 1000DPI 14.idle speed: 0-1000 mm/s 15.engraving speed: 0-800mm/s 16.cutting speed: 0-600mm/s 17.engraving cutting depth: 0-10mm (for reference only, depending on different materials and performance). 18.Engraving and cutting accuracy: ≤1000dpi. 19. separation cutting: up to 256 layers color separation and cutting. 20.Auxiliary positioning: red light positioning. 21.Safety protection: burned out flame retardant, water cut protection, open cover protection. 22.software name: RDdrawDSP control system 23.Software support: Coreldraw output, AutoCAD output，lightburn. 24. software environment: Windows XP, WIN7, WIN8, WIN10. 25. image format: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI. 26. data transmission: USB2.0, network connection, offline U-disk. 27. power supply: AC110±10% 60Hz 28.packing: standard export wooden box 29.FDA, CE certification, ISO9001 quality certification. Packing 1x laser engraving machine 1x water pump 1x air pump 1x repair tool 1x power cord 1x sealant 1x network cable 1x CD 1X fan 1x USB data cable 1x pipe clamp 1x dimming paper 1x smoke tube 1x manual

Price: 2649.39 USD

Location: El Monte, California

End Time: 2024-12-19T06:33:28.000Z

Shipping Cost: 0 USD