98209800 O-Ring Kit for Swimming Pool Air Safety Valve Replaces 98209803 9820980

Description: Air Relief Valve O-Ring kit Compatible with 98209800 98209803 98209804 for Pool/Spa Filter Pac Fab 98209800 ，98209803 ，98209804 O-rings replacement instructions disconnect power from pool pumps. unscrew entire valve and pressure gauge together from the top of the DE filter by turning valve counter-clockwise. once removed, twist part A and part B counter clockwise until rotation stops. this step is a little tricky and you may need an extra helping hand pull tabs slightly while simultaneously rotating part B in direction of red arrow until rotation stops Note: Do not use excessive force, tabs only need to move a fraction of an inchi and part B only needs to turn a tiny bit (maybe only 5 degrees of rotation) separate part a and part B with a firm pull apart. Wash Part A and Part B to remove any debris. Use a plastic tool or wooden toothpick to remove the small and medium o-rings Note: Do not use a metal tool as it may damage the surface. peplace the small and medium o-rings with the new o-rings. Apply silicone o-ring lubricant to both rings. put part A and part B together carefully aligning the ears on part A into the slots on part B make sure parts A and B snap firmly together, this will take a little force (about 5 pounds) and you should hear a little pop . if properly popped back together , you should be able to easily rotate parts together in a clockwise motion Replace the large o-ring on the threaded end (bottom) of Part B. Use o-ring lubricant to help it seal properly. Screw the air-relief valve back into the top of the DE filter. Do not over tighten. turn on pumps to test the air relief valve. turn Part A counter-clockwise to open valve. When water appears at the washout port, rotate Part A clockwise to close the valve and stop the water .

Price: 10.49 USD

Location: Walton, Kentucky

End Time: 2025-01-19T15:22:02.000Z

Shipping Cost: 0 USD