Alliance Gator Clean XP Oil & Grease Remover for Pavers & Natural Stone 1Qt

Description: Alliance Gator Clean XP Oil & Grease Remover for Pavers & Natural Stone 1Qt About this item Oil & Grease Remover For Pavers & Natural Stones 1 Qt covers approx 6' sqft Product description Alliance Gator Clean XP Oil & Grease Remover for Pavers 1 Quart Bottle - Pour N Go Extra Performance Shake it, Spread it, Let it Dry and Sweep it For Concrete Pavers & Natural Stones Easily Lifts & Absorbs Embedded Oil Stains as it Dries from Liquid to Powder No Scrubbing No Rinsing No Mess Covers approx 6 square feet Always test a small area before use. Do not use on wet surfaces. Use above 40°F (4°C) and provide maximum ventilation. INSTRUCTIONS Shake bottle before applying to stain, extending one inch beyond perimeter of the stain. Coating thickness should be 1/8”. Allow to dry completely to powder. Wait 12 to 24 hours, depending on temperature, humidity and ventilation. Sweep it up. If area still appears dark, provide adequate ventilation and allow moisture to evaporate. If stain remains, reapply, scrub with hard bristled brush, and repeat steps 2 and 3. Rinse off any remaining residue with water. PLEASE NOTE Before using on sealed, colored, or painted surfaces, ALWAYS TEST the product on a small hidden area of approximately 4 square inches (26 sq. cm.) to ensure the results will meet your expectations. Prior use of other cleaners may inhibit performance. If applied on sealed pavers it may damage the seal. CAUTION Provide maximum ventilation during use. Do not mix with other chemicals. KEEP OUT OF REACH OF CHILDREN AND PETS. Avoid contact with grass or plants. Avoid inhalation of dust when sweeping. Avoid eye and skin contact. EYE CONTACT: Flood eyes repeatedly with water and call physician. IF SWALLOWED: Do not induce vomiting. Drink a glass of water and call physician immediately. Item Form Liquid, Powder Brand Alliance Surface Recommendation Stone Unit Count 32.00 Fl Oz APPLICATION INSTRUCTIONS PLEASE NOTEIf applied on sealed pavers it may damage the seal.Before using on sealed surfaces, ALWAYS TEST the product on a small hidden area of approximately 4 square inches (26 sq. cm.) to ensure the results will meet your expectations.FAQ (Prior use of other cleaners may inhibit performance. Visit Gator Clean FAQ page for cleaning tips.)Not recommended for synthetic oil stains.Do not use on wet surfaces. Use above 40°F (4°C) and provide maximum ventilation.STEP 1Shake bottle before applying to stain, extending 1″ (25 mm) beyond perimeter of the stain. Coating thickness should be 1/8″ (3 mm).STEP 2Allow to dry completely to powder. Wait 12 to 24 hours, depending on temperature, humidity and ventilation.STEP 3Sweep it up. If area still appears dark, provide adequate ventilation and allow moisture to evaporate.STEP 4If stain remains, reapply, scrub with hard bristled brush, and repeat steps 1 to 3.STEP 5Rinse off any remaining residue with water.

Price: 33.99 USD

Location: Williamstown, New Jersey

End Time: 2024-01-20T21:45:02.000Z

Shipping Cost: 0 USD