Description: Amplifier Car Audio Monoblock Class D Compact Subwoofer Amplifier, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made toEngineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical systemMOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists Product Description PHF450D MONOBLOCK AMPLIFIERCAR AUDIO FULL RANGE AMP 1.Level Controller: Controls the left and right channels output level 2.Input: The RCA jacks allow for a low level Left and Right channel signal input.Simply connect to the source unit using RCA type audio cables,keeping them away from power wiring wherever possible to reduce riskof noise 3.Remote Leve : ControlThis port is for the remote level control. The control is intended to allowthe user tothelever of aain up tothe maximum adiustment lever set onthe amplifier. The control does not add additional boost, it onlyattenuates the setting that is fixed at the amplifier's controi panel. 4.HPF Crossover Adjustment: Use the adiustment to select the crossover point. Remember that youmust adjust the High Pass position(HPF) as the HPF is alwaysengaged. The HPF is limited between 20Hz-20KHz. 5.HPF Crossover Adjustment: Use the adiustment to select the crossover point. Remember that youmust adjust the High Pass position(HPF) as the HPF is alwaysengaged.The HPF is limited between 20Hz-20KHz. 6.Hi Input Connector: High level inputs left and right to connect the amplifier to the radiosspeaker outputs. The amplifier automatically turns on as soon as asignal is received (AUTO TURN ON) 7.Power Input Connections: These connections are for input power, chassis ground, and remote turn-on. 8.Speaker Output Terminals: Connect yours peakers to these terminals. Stereo connections areconnected as labeled. Bridged connections use the LEFT+ andRIGHT- as the two connections. The mono blocks will run 2 ohmsmono! ONLY. 9.Status LED's: These lights indicate when the amplifier is powered up normally andwhen there is a protection fault. The Protect LED is laminated whenthere is a problem with your amplifier. Digital Monoblock Specifications MODEL PHF450D RMS Power - 2ohm Mono 450W RMS Power - 4ohm Mono 300W Low Pass Frequency Crossover 35Hz - 20KHz High Pass Frequency Crossover 20Hz- 20KHz Input Sensitivity 9-0.3Volts Signal Noise Ratio >90dB T.H.D - 4ohms <0.5% Dimensions 6.3in(160mm)×3.3in(84mm)×1.42in(36mm) Item model number PHF450D Item dimensions L x W x H 6.3 x 3.3 x 1.42 inches Mounting Type Surface Mount Product Dimensions 6.3 x 3.3 x 1.42 inches; 1.81 Pounds Country of Origin China Voltage 14.4 Volts Shipping Fast shipping is very important for us. Our standard US shipping service is FREE. Your order will be shipped within 2-3 business days upon full payment received. Your order will be delivered within 2-3 business days after the handling time. We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time. We are not responsible for undeliverable addresses. Returns and payment We offer a 30 days return policy from checkout winning date. We allow only PayPal as payment methodFeedBack Your feedback very important to us, after you get your package and you are satisfied with our service please leave us positive feedback If you have any problem with your order / any questions please before leave any type of feedback For any questions, using eBay contact system Please visit our eBay store to check out other items for sale!Thank you for shopping at our store.
Price: 60.99 USD
Location: Mount Prospect, Illinois
End Time: 2024-11-09T06:16:00.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Does not apply
MPN: Does not apply
Item model number: PHF450D
Item dimensions L x W x H: 6.3 x 3.3 x 1.42 inches
Mounting Type: Surface Mount
Product Dimensions: 6.3 x 3.3 x 1.42 inches; 1.81 Pounds
Country of Origin: China
Voltage: 14.4 Volts
Type: Does not apply