Aolamegs Ammo Box Can Lock Hardware Kit 50 Cal Fat 50 30 Cal 20 mm 40 mm Militar

Description: Hunting Accessories Clear Handgun Rack with Anti-slip Strip Acrylic Gun Display Stand Pistol Holders BUY NOW Bulletproof Vest IIIA Level Anti-Bullet Armor Vest Carrier With Plates XL BUY NOW Ammo Box Can Lock Kit Bolt 30 50 Cal Steel Gun Safe Box Hardware Kit Locking Set BUY NOW 7.62x39 Magazine Marking Bands 6 or 12 Pack Rubber Band Magazines ID BUY NOW Foam Gun Rack and Base 2 Kit with Magnetic&Hook Strip Gun Storage Rifle Holder BUY NOW Hidden Gun Shelf Concealment Picture Frame Hidden Safe Pistols Handgun Gun Safe BUY NOW 5Pack F*** Around And Find Out Sticker Decal FAFO Security Gun Vinyl Stickers BUY NOW 6Pack Empty Chamber Key Chains with Flags for Safety Tags Gun Pistol Indicator BUY NOW Aolamegs Ammo Box Can Lock Hardware Kit .50 Cal, Fat 50,l 30 Cal, 20 mm, 40 mm You get the lock hardware kit; you DO NOT GET the Ammo can and padlock Close the lid and latch of the ammo can and mark the center of the hole where the locking hardware will be installed (try to be exact!)Drill a 5/16”hole into the can at the center mark (drilling out a smaller guide hole beforehand may be helpful)Notice： 50cal can ammo hole dimension is 1/2", you need to enlarge it,otherwise the lock hardware kit cannot be passed through. Form the outside of the can,insert the locking stud through the drill hole On the inside of the can,put the neoprene washer over the threads of the locking stud,followed by the small washer,and then the nylon lock nut.Tighten the assembly with a wrench,being aware that the “round” side of the locking stud may have sharp edges/burs,so a tool should be utilized on”round”side,not bare hands For ammo cans with large holes,put the large washer between the ammo can’s latch and the padlock in order to prevent the large latch hole from slipping over the padlockONE SIZE FITS ALL - Works on 50 Cal, Fat 50, 30 Cal, 20 mm, 40 mm Ammo cans. Will work with medium size locks as large as 1/4" lock shackleInstructions:Close the lid and latch of the ammo can and mark the center of the hole where the locking hardware will be installed (try to be exact!)Drill a 5/16”hole into the can at the center mark (drilling out a smaller guide hole beforehand may be helpful)Form the outside of the can,insert the locking stud through the drill holeOn the inside of the can,put the neoprene washer over the threads of the locking stud,followed by the small washer,and then the nylon lock nut.Tighten the assembly with a wrench,being aware that the “round” side of the locking stud may have sharp edges/burs,so a tool should be utilized on”round”side,not bare handsFor ammo cans with large holes,put the large washer between the ammo can’s latch and the padlock in order to prevent the large latch hole from slipping over the padlock If you finshin the assembly and find the locking stud is not centered,simply file or drill the ammo can’s latch holes to be larger until the latches properly fit the locking stud

Price: 10.29 USD

Location: Rancho Cucamonga, California

End Time: 2023-09-25T07:29:35.000Z

Shipping Cost: 0 USD