Description: Fully Pro Built and Tuned by a Professional FPV Pilot. The AOS HS5 is a High Speed Drone capable of reaching speeds over 200mph. Immerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera with no props in view. This expansive view is perfect for DJI O3 users and guarantees an immersive flight experience for both professionals and enthusiasts. ND filters for the O3 Camera are fully supported. The AOS HS5 is designed to be an incredibly easy and user-friendly FPV frame to build. The front shell has space and a place for every component: your Camera, VTX, Receiver, Antennas, and Electronics stack are all contained inside. The aerodynamic shells of the AOS HS5 have been optimized with the use of CFD tools to minimize the drag on the drone at high speeds. The tail fins add aerodynamic stability for smooth footage. Aerodynamic spinners for the props minimize the drag of the motors. A simple twist locks and unlocks the rear shell for easy battery swaps. Cutouts allow access to the USB ports of the VTX and flight controller as well as providing essential cooling for the ESC. The rear shell only contains the battery making it straightforward to change packs without disturbing any of your electronics. Start slow with your usual 30 degree camera uptilt and work up to ultra high speed runs with up to 90 degrees camera uptilt. Specs - Supports up to 6" Props (Recommend APC 5.25” Props) Supports 30.5 mm Electronics Stacks Supports all popular Digital and Analog VTXs 155° FOV no props in view (at typical high speed camera uptilt) Fully DJI O3 compatible (ND filters) Supports 19 - 20 mm cameras Supports up to 1800mAh 6S Batteries (90 x 40 x 55 mm) ⌀16 - ⌀19mm motor mounting (2808 1950KV Recommended) 8mm Carbon Frame All 3d Printed parts from Brain3d Premium Components Used In This Build - AOS HS5 Frame 3d Printed Shell From Brain 3d Iflight Blitz F7 Flight Controller Iflight Blitz 55a Blheli-32 4 in 1 Esc Emax Pro Series 2808 1900kv Motors Gemfan 6042 Props BetaFPV 2.4ghz ELRS Receiver Sequere M10-18 GPS Module DJI O3 Air Unit Video FPV Video System - 32gb onboard recording and SD Card Support. Setup, Tuned and Tested for optimal operation using Chris Rosser’s AOS HS5 Betaflight Preset. Includes GPS Return Home with Auto Landing. Also includes Extra Props and Arm Covers. All Electronics are Updated to the Most Current Available Firmware.
Price: 600 USD
Location: Simi Valley, California
End Time: 2025-01-14T19:22:41.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted