Arducam Multi Camera Adapter for RaspberryPi Camera Module 3, Doubleplexer St...

Description: This multi-camera adapter board is designed for Raspberry pi ZERO and let you connect two 5MP or 8MP cameras to Pi Zero.It is also compatible with the Raspberry Pi 4B, 3B+/3B. it also can be used for other Raspberry Pi boards with minor software modifications. Only one of the two cameras can be activated at a time, and they are working in alternate ways. It cannot run two cameras at the same time, but we build a simple software that can run two cameras and make it looks like working at the same time. But the drawback is the frame rate, and resolution will be fairly low, may be useful for surveillance. NOTE The Raspberry Pi multi-camera adapter board is a nascent product that may have some stability issues and limitations because of the cable’s signal integrity and RPi's closed source video core libraries, so use it on your own risk. For the use of remote control terminals, first specify the location of the image display, please run the commands shown as below: export DISPLAY=:0 ./previewOpencv Raspberry Pi Touch Display (DSI interface) Compatibility Issues: When you use a DSI display together with this adapter, you will encounter the issue of I2C conflicts. We recommend you use HDMI displays or run headless when using this adapter. Multi-Camera Solution: Fully compatible with Raspberry Pi Camera Module 3, up to two 5MP OV5647 or 8MP IMX219 or 12.3MP IMX477 or 12MP IMX708 cameras connected. No mixing allowed. Compatibility: Designed mainly for Raspberry pi Zero, it also can be used for Raspberry Pi boards with minor software modifications. If you are using it on a Pi 5, 4B or Pi 3B/B+, a 22-22pin FPC camera cable is needed. Alternative Work: Only one of the two cameras can be activated at a time, and they are working in alternate ways. Easy to Operate: A simple software built to run two cameras.

Price: 44.4 USD

Location: Brentwood, New York

End Time: 2024-11-15T18:45:19.000Z

Shipping Cost: 0 USD