Auto Command Design Tech Keyless Remote 26671 Fob FCC ID ELGTX7 autocommand fob

Description: FCC ID ELGTX7 26671 Keyless Remote car starter AutoCommand DesignTech Auto Command Design Tech key fob transmitter control - Pre-Owned 741po One (1) AutoCommand 1-way ready to program with batteries installed keyless remote control. This remote will work with your vehicle's OEM RKE FACTORY installed RKE (remote keyless entry) security system once programmed to your vehicles installed system. Specifications Condition Pre-Owned 741po FCC ID ELGTX7 Part# Part #: 26671 Dealer part # 14761032268 Buttons 5: Remote Starter, Panic, Lock, Unlock; LED Green/Red Frequency 315 MHz Battery Type 1: CR2032 Additional Information Attention: Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same. _____________________________ Condition Explanation: Pre-Owned Pre-Owned: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. Scroll through listing for full details and description of any imperfections. _____________________________ Programming Instructions: Your system can learn up to 4 transmitters. The following procedure will show you how to add additional transmitters or replace old ones. The remotes in this package have already been programmed to the control module. Each transmitter can be programmed one button at a time or you can use an auto learn procedure that learns the intended factory configuration. Learning one button at a time is generally only used when using one transmitter to control two different cars. Being able to program functions to different channels on each transmitters prevents multiple cars from responding simultaneously. 1. Turn the ignition ON 2. Press/release the Momentary switch the same number of times as the desired transmitter learn step number, and then Press/HOLD. 3. After holding the Momentary switch for 2 seconds the LED will begin to flash to indicate the number of the accessed transmitter learn step. 4. Press the transmitter button that you want to control the function assigned to that channel. The Horn/Siren will emit a long chirp. NOTE: For transmitter learn Step #1, you must press the â€œ*â€ button on the transmitter. This will automatically program the transmitter buttons to the default function configuration. See the transmitter button auto learn chart for the assignment functions. You can learn more than one transmitter function without having to repeat the entire procedure by advancing to the next channel immediately after programming your first channel. To do this, first release the Momentary switch and then press/release it the same number of times as the difference between the current transmitter learn Step and the desired transmitter learn Step, and then press/HOLD it. Example: To advance from Transmitter Learn Step 2 to Transmitter Learn Step 8, release the Momentary switch and then press/release it 6 times and HOLD it on the 7th press. After holding the Valet switch for 2 seconds the LED will flash 8 times and repeat. You can now learn a transmitter button to step 8. There are several ways to exit Transmitter Learning, by TimeOut, Ignition or Momentary switch presses. 1. TimeOut: If more than 15 seconds elapse between Momentary switch presses or transmitter signals. 2. Ignition: If the Ignition is turned off at any time during transmitter Learning. 3. Momentary switch presses: if you press/release the Momentary switch more times than there are Transmitter Learning steps in the menu. The Horn output will pulse 5 times rapidly and the LED will turn off to indicate that you are exiting feature programming.

Price: 26.08 USD

Location: Wellsboro, Pennsylvania

End Time: 2024-02-29T14:19:29.000Z

Shipping Cost: 6.96 USD