Automatic Electric Gate Lock for Swing Gate Opener Gate Operator System Device

Description: Specification Material: Galvanized Iron Model: DS-02 Operating Voltage: DC/AC12-24V Working Temperature: 0-45℃ Humidity: 0-95% Color: Black Static Current: 4mA±1mA Operating Current: 50mA±2mA Output Type: Dry Contact (Switching Action) Delay Time Range: Min. Approx. 2S, Max. Approx. 6.5S Gross Weight: 2.5kg/5.51lbs Package Size: 26.5*18.5*6cm/10.43*7.28*2.36in Package Included 1*Lock with a Power Cable 1*Lock Receiver 2*Keys 1*Clevis Pin 1*Plug Pin 1*Small Control Board 1*Gasket 1*English Manual Automatic Electric Gate Lock for Swing Gate Opener Gate Operator System DeviceDescriptionThis electric gate lock is a great solution for automatically locking and unlocking gates. It not only adds security but also protects the gate from damage by strong winds. This strong, durable, and easy-to-install electric door lock is a smart choice for you. Key FeaturesAutomatic Opening and Closing: This electric door lock automatically locks and unlocks the door when the door opener is activated without having to push the door manually, which is labor-saving and smart. High-quality Material: This electric door lock is made of high-quality galvanized iron, which is very strong and durable. And the corrosion-resistant, rust-proof galvanized iron extends the life of the product. Easy to Install: The compact size and light weight of this electric door lock make it effortless to install. And we provide you with detailed installation instructions to make it easy for you to install. Excellent Performance: This electric door lock is made of reinforced metal and superb craftsmanship to make it have excellent wind and water resistance, which can guard the door even in bad weather. High Security: The electric door lock keeps your door tightly closed, adding security to your door opening system. The sturdy electric door lock can prevent thieves, burglars, etc. from entering your gate to safeguard your person and property. Wide Application: It works with most single or double swing gate openers, as well as most other brands of 24V gate opening systems. Easy to Operate: This electric gate lock features a small controller allowing you to easily operate it remotely, which is very convenient. Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible. Details Three Rolling Teeth: The electric door lock features a three-rolling tooth closure design, making it easier and more secure to close the door. Lock Keys: The manual keys are included to enable manual operating during a power outage or when you lose the remote. Waterproof Gland: The waterproof gland protects the cable and enhances water resistance, which extends the life of the product. ApplicationIt is suitable for most types of gates and perfect for driveway gates made of steel, wood, vinyl, and plastic and shaped as the panel, tube, and chain-link. SpecificationMaterial: Galvanized IronModel: DS-02Operating Voltage: DC/AC12-24VWorking Temperature: 0-45℃Humidity: 0-95%Color: BlackStatic Current: 4mA±1mAOperating Current: 50mA±2mAOutput Type: Dry Contact (Switching Action)Delay Time Range: Min. Approx. 2S, Max. Approx. 6.5SGross Weight: 2.5kg/5.51lbsPackage Size: 26.5*18.5*6cm/10.43*7.28*2.36in How to InstallSTEP 1: Remove the front end of the actuator that is attached to the gate bracket with a clevis pin and clip pin. Tie or clamp the front of the gate with wire to support it. This will enable you to swing the gate manually while installing the gate lock. Please note that the front ends of both actuators need to be disconnected for dual gate systems. STEP 2: Swing the gate to the closed position. Find the best position to mount the lock and the receiver. It must be level with the actuator. The lock should be mounted on a gate cross member or another solid part of the gate surface. STEP 3: Position the lock in an approximate mounting position on a cross member or other mounting surface that is level with the actuator. The lock can be moved into an exact position later. STEP 4: Find a location on the fence post level with the gate lock and temporarily tie the lock receiver provided. Slide the gate lock back and forth until it lines up with the receiver. The pin holes on the receiver must line up with the slot in the lock. Once this position is achieved, mark the post through the center of the two slots in the receiver. STEP 5: Drill through the marks on the post and attach the receiver with the mounting bolts, washers, and nuts that you have purchased. STEP 6: The gate lock must now be permanently mounted to the gate cross member or gate surface. Make sure that the lock is aligned with the receiver and mark holes on the gate through the upper and lower slots on the lock. STEP 7: Drill holes through the marks and attach the lock to the gate surface with the appropriate hardware. Do not use bolts greater than 5/16 inch diameter because they can't go through the slot. STEP 8: Insert the clevis pin through the holes in the receiver and hammer the locking cap onto the bottom of the pin. How to Use Small Control BoardThis small control board 12-24 Volt AC/DC powered relay can be used for other gates/garage door operator brands. The automatic electric lock unlocks and locks automatically as an electronic gate is activated to open and close (depending on standard 12V/24V gate outputs).The blue and white adjustable resistance on the board is used to adjust the delay time: The minimum is 2 seconds counterclockwise and the maximum is 6.5 seconds clockwise.When the door lock is working, the DS33A will power on, the relay absorbs and closes, and the delay begins. When the delay time reaches, the relay is disconnected.Connecting Terminal :4.1 VCC: Connecting 12V/24V DC/AC onboard power supply “+”.4.2 GND: Connecting power supply “-”.4.3 GND: Connecting to the LOCK port on the Ground board (Reserved terminal).4.4 NO: Directly connected to the electric lock power line in parallel for switching.4.5 CM: Directly connected to the electric lock power line in parallel for switching. Package Included1*Lock with a Power Cable1*Lock Receiver2*Keys1*Clevis Pin1*Plug Pin1*Small Control Board1*Gasket1*English Manual NotesPlease read the instructions for use carefully before use.Electric locks improve the security of the gate and are highly recommended if you have animals or live in an area affected by strong winds or the gate is over 1.5 meters (7 feet).Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Nov 5, 2024 at 18:22:24 PST, seller added the following information:

Price: 66.02 USD

Location: Chino, California

End Time: 2025-01-06T02:15:29.000Z

Shipping Cost: 0 USD