Description: Absolute Linear Magnetic Encoder System (BML08F2) includes Cordset (BCC0942). Magnetic tape and stainless steel protective tape covering not included - see our store listing for it. Typecode: BML SL1-ALZ1-B0ZZ-ABA1-S284 BiSS-C interface + analog sin/cos interface. Basic features Application: linear/rotary motion Measuring principle: absolute measuring system Series SL1 Electrical connection Connection Connector, M12x1-Male, 12-pin Connection version axial Polarity reversal protected yes Electrical data Current consumption max. at 24 V DC 70 mA Hysteresis H max. 1 μm Operating voltage Ub 10...30 VDC Overvoltage protection no Periods 2 mm Power consumption ≤ 1.4 W (no load) Switch-on delay max. 100 ms Voltage-proof up to (GND to housing) 500 V DC Environmental conditions Altitude max. 2000 m Ambient temperature -20...70 °C EN 55016-2-3, Radiation Industrial areas EN 60068-2-27, Continuous shock 150 g, 2 ms EN 60068-2-27, Shock 100 g, 6 ms EN 60068-2-6, Vibration 20 g, 10…2000 Hz EN 60068-2-64, Noise 20 g, 5…2000 Hz EN 61000-4-2, ESD Severity Level 4 EN 61000-4-3, RFI Severity Level 3 EN 61000-4-4, Burst Severity Level 3 EN 61000-4-5, Surge Severity Level 2 EN 61000-4-6, High-frequency fields Severity Level 3 EN 61000-4-8 Magnetic fields Severity Level 5 Ext. magnetic fields max., in operation 1 mT (no effect) IP rating IEC 60529 (connector) IP67 Overall system temperature coefficient 10.5 ppm/K Relative humidity ≤ 90 %, non-condensing Storage temperature -25...85 °C Functional safety MTTF (40 °C) 217 a Interface BiSS-C clock frequency 0.1...10 MHz Bits, number 32 Bit Clock RS422 differential signal Count direction rising Cycle time min. 1 ms Differential signals yes Error signal yes Interface BiSS-C Analog Sin/Cos (1 Vpp ± 0,35 V) Interface coding Binary Real-time signals Analog, sin/cos Signal sequence A before B = rising Material Housing material Die-cast zinc, nickel-plated, Chrome-plated Housing material, surface protection nickel-plated Chrome-plated Mechanical data Diameter min. 400 mm Dimension 16 x 18.6 x 54 mm Lateral offset (Y) ±1.5 mm Mounting part Through-hole 4.3 mm Pitch max. ±0.5 ° Pole width 2 mm Procedure direction Lengthwise to tape Roll max. ±0.5 ° Tangential offset (X) max. ±1 mm Weight 50 g Yaw max. ± 1.0 ° Range/Distance Interpolation factor 2048 Measuring range 8190 mm Non-linearity of sensor head, max. ±5 μm Optimal read distance 0.4 mm Read distance 0.01...1.3 mm Repeat accuracy ≤ 1 μm Resolution 0.9765625 μm (1000/1024 μm) Traverse speed max. 10 m/s Single-Ended Cordset SpecsBCC0942 (BCC M42C-0000-1A-049-PX0C25-050)ConnectionM12x1-Female, angled, 12-pin, A-codedCablePUR black, 5 m, Drag chain compatibleNumber of conductors12Conductor cross-section0.25 mm²Cable temperature, fixed routing-50...80 °CCable temperature, flexible routing-25...80 °COperating voltage Ub30 VDC / 30 VACRated current (40 °C)1.5 AIP ratingIP67, IP68, IP69KApproval/ConformityCEcULusWEEE
Price: 225 USD
Location: Groton, New York
End Time: 2024-08-20T23:47:54.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Balluff
MPN: BML08F2
