Bendpak MDS-6LP 6,000 Lbs Open-Center Mid-Rise Lift

Description: Bendpak MDS-6LP 6,000 Lb. Open Center Mid-Rise Car Lift The open-center design of the MDS-6LP makes it a clear leader in convenience and work productivity. Designed for home garages, full-service shops and quick-lube pits, and basically anyone who works on cars. This rugged mid-rise lift is also perfect for shops with low ceilings. BendPak's 6,000 pound capacity MDS 6K models are open center mid rise auto maintenance lifts for servicing passenger cars, SUV's and light trucks. The exclusive open center design of the MDS-6K not only allows full unobstructed access to the underside of the car, but is also clear of frame cross members on the floor that are typical with other mid rise lifts. This fully open center design, both top and bottom, makes the MDS-6K a clear leader in convenience and work productivity. Features Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class. Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity. Solid‐steel safety lock bars engage automatically during ascent. Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 psi, 10 CFM air source at time of installation.). A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles. Hinge point features Zerk grease fitting to allow lubrication at critical wear areas. Comes standard with four durable cushioned‐rubber contact blocks, permitting fast vehicle setup. Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue. Powder coat finish provides a long lasting durable finish. Specifications Model MDS-6LP Type Surface Mount Lifting capacity 6,000 lbs. / 2,722 kg A Lifting height (full rise - no blocks) 44.5 in. / 1,130 mm Lifting height Med. Lift blocks 1.5 in. (38 mm) 46 in. / 1,168 mm Lifting height Tall Lift blocks 2.9 in. (75 mm) 47.5 in. / 1,206.5 mm B Platform length 67 in. / 1,701 mm C Total length Ramps Only: 102.5 in. min. / 2,603 mm Ramps and Extensions: 150.25 in. max. / 3,817 mm D Lowered height 5.2 in. / 132 mm E Platform width 19 in. / 484 mm F Width between Platforms 40 to 46 in. / 1,018 to 1,168 mm G Ramp Length 17 in. / 432 mm H Ramp Extension Length 24 in. / 607 mm Maximum Distance to Console 40.25 in. / 1,022 mm Lifting time 35 seconds Hydraulic Pressure Developed at Max. Capacity 1700 psi / 11.72 N/m2 Power Unit Motor 208-230 VAC at 60 Hz., 1 Ph. * Specifications subject to change without notice. Downloads Manual Specs Sheet **Bendpak charges sales tax in California** ***It is the buyer's responsibility to unload the freight at their location.

Price: 6557.25 USD

Location: Dover, Delaware

End Time: 2024-12-21T18:36:45.000Z

Shipping Cost: 0 USD