Description: FAST TURNAROUND All items in stock are dispatched within 1 business day. WORLDWIDE SHIPPING We ship to any country in the world. PROUDLY AUSTRALIAN Owned and Operated. Store Categories Store Categories Voron 0 Voron 1.8 Voron 2.4 Voron Trident Kits Frames Printed Parts Fasteners Fastener Kits High Tensile Bolts Stainless Bolts Nuts and Washers ABS Panels Lubricants Electrical & Electronics Power Supply Motors Extruder & Hotend Bearings Magnets Pulleys Belts Filament Tools Bondtech Nozzles Buildplate Phaetus Engineer Eight Tool LDO Fans BIGTREETECH Motion Linear Rails Shop All BTT BigTreeTech Octopus PRO V1.0 Mainboard STM32F446 Main Control Chip The main control board uses 32-bit ARM-level Cortex-M4 series STM32F407ZET6/ STM32F429ZE / STM32F446ZE chip with a frequency of up to 168MHz and the flash is 1MB. Support 60V Input Supports up to 8 3D printer motherboards with a maximum 60V stepper motor. The motor drive power supply supports up to 60V input (only for the motor drive power supply). 6 Controllable Fans Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options. Update Firmware: Klipper/Marlin/RRF Supports firmware update via DFU mode. This is where the firmware is sent to the board directly from the PC and does not require a bootloader however this method is not recommended for novice users as discussed later in this document. Level conversion IC Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch. Wiring diagrams, pinout designations and all additional information can be found here on BTT SKR Pico Github repository here: https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-Pro?spm=a2g0o.detail.1000023.17.216120824iKJDG Motherboard SizeWiring Diagram
Price: 144.6 AUD
Location: Bentleigh
End Time: 2023-11-10T12:16:04.000Z
Shipping Cost: 19.25 AUD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Does not apply
MPN: Does not apply
