C9345 Maintenance Tank Chip Resetter for Epson ET-8550 ET-16600 WF-78XX others

Description: Be careful of sellers with HUNDREDS of negative feedbacks ! High volume of defective material and lack of response from seller when your item doesn't work. Not here. 100% positive feedback and we have never had any returns of our resetter products. NO SALES to those using freight forwarders, particularly those in Florida. When I have sold to those buyers, they often fail to get marked by USPS as "delivered". If your address is to a freight forwarder, I will cancel the sale, refund your purchase and put you on my blocked buyer list. I NOW HAVE C9345 resetters that use USB C cables instead of batteries. AND THE USB C CABLE WILL BE INCLUDED WITH YOUR PURCHASE !! This is better, batteries will eventually die. You will have a CHOICE which you prefer. AFTER TESTING, the resetters with a USB C cable are a BIT harder to get it placed onto the chip. I have done it but it is tedious. When considering your choice, keep that in mind. C9345 Maintenance Tank Chip Resetter. Tested and selected primarily for use on C9345 maintenance tanks which will work with the printers at the bottom of this description. We have tested these units for proper operation on a C9345 (my ET-8550) as far as full functionality and a working battery. Battery is also replaceable from a screw at the side of the unit under the label. Full instructions WITH PICTURES for how to reset your maintenance tank are included. And a link to a LIVE youtube demonstration of the reset procedure. This will return the chip on your Epson C9345 to showing as EMPTY so that you can run a completely new cycle of ink into your maintenance tank. Most tanks don't really FILL UP after one cycle and you should be able to run at least 2-4 more cycles through. If you do a lot of printing this will be more economical than buying (and waiting for) new maintenance tanks. Epson is out of stock frequently and you don't want to have your printer "down". Let's be EARTH friendly and keep these tanks out of the landfills. We also sell C9345 "chips" in another auction and now also compatible C9345 replacement maintenance tanks. These work great on my ET-8550, but will also support the below printers too. Want to replace the inside sponges with brand new perfectly cut and formed sponge material ? I have those in stock too ! With full instructions. Notice: It has been reported to me that if you are trying to reset a maintenance tank that is already 85% or more full - that the resetter may not fully work. In this case, you MAY NEED to purchase a new CHIP for your maintenance tank. Fortunately I do have your back and I sell those in my store. Let me know and I will give you a special discount price on the chip and send it with the resetter. The resetter instructions WILL SAY to be sure you reset maintenance tanks BEFORE it reaches 85% full, but I want to be sure you get this information before you purchase. Not responsible for any issues you may have if you experience ink issues using resetters or replacement chips. So far, I have used them with no issues and my buyers also report no issues. Use responsibly. This works on the ET-8550 / ET-8500 and also on the list below or in case I missed one, YOUR printer if it uses a C9345 maintenance tank. These are all brand NEW. Maintenance Tank materials sold in my store. Explanation of each item and why you would choose one over another. The components you will find that I sell for Epson/Canon photo printers are for these models of maintenance tanks Epson C9345 – Epson T3661 – Canon MCG02. These maintenance carts work for various printers. See the list of printers supported in each auction. Your maintenance tank starts to fill up with ink that is sent there for cleanings or deep cleanings or just because you haven’t printed in a while and your printer decided to do an ink purge cycle to keep its nozzles clear of dried ink. Purge cycles are a GOOD THING. I sell: 1. Compatible Maintenance Tanks themselves2. Chips that go onto the Maintenance Tank3. Resetter to “reset” the chips on the Maintenance Tank4. Inside sponge material that soaks up and holds the ink (think diapers) For most printers, once your maintenance tank fills up with ink, it will eventually not allow you to print anymore until you replace it. That’s what Epson/Canon wants you to believe. In reality, TESTS have shown that at this point, there is still plenty of space left in the tank to continue to run ink through it for sometimes 2 to 5 complete additional CYCLES of ink. You have options which I will spell out. 1. Maintenance Tank. – You can just buy a NEW compatible maintenance tank. Remove the old, put in the NEW (which has a NEW chip) which will show the tank as EMPTY, throw away the old tank. You’re done. Except you have added to the landfill a big heavy plastic box that will take 100 years to disintegrate. Believe me, that’s the easiest thing to do. And in most cases my compatible maintenance tanks are cheaper and quicker than buying one from Epson/Canon. But other alternatives are also available. 2. CHIPS. Your printer writes data to the CHIP on the maintenance tank ESTIMATING how much space you have left. If you buy a NEW chip and replace the old one, your printer will be fooled into thinking your tank is now EMPTY and will allow you to run another cycle of ink into it. This is a little tedious to get the chip in exactly the right spot and may benefit from a little glue to get it into exactly the right spot. But the cost for a chip is lower than any of the other options and will get you by if you don’t want to invest in a Resetter. In this case you can just buy a new CHIP every time the printer tells you the chip (tank) is full. 3. Resetter. This is a device which will allow you to RESET the data on the chip to fool your printer into thinking your tank is empty and will allow you to continue to print. Chips can be “reset” over and over and you will NEVER need to throw away your bulky plastic tank. But resetters are an expensive item as far as things in this list go. They are intended for the most hardcore print enthusiasts who print A LOT. Resetters use batteries or USB power to “glitch” the chip and RESET it back to an “empty” condition. They are meant to be used BEFORE the tank reaches 15% of space remaining in the tank. If you purchase a resetter, remember this. 4. Sponge Material. This soaks up the ink in the tank and keeps the tank from leaking the ink stored in the tank. At some point, after many cycles of ink entering the tank, it will get full. You don’t want to have ink leaking out inside your printer, so this is a solution. Tanks can be opened easily and the old pads removed and either replaced or rinsed out and dried. My sponge material is made to fit perfectly into the tanks. Remove old pads, throw away, rinse the tank in the sink, dry the tank, install new pads. Keep in mind that replacing the sponge pads DOES NOT affect the ink level being shown by the chip. If the chip is showing the tank is full, you will still need to either replace the chip or reset it. The sponge material is simply an item that will allow you to continue to use the tank and eliminate the need to “throw it away”. Think GREEN. These options will extend your printing capabilities for all of the Canon/Epson models used by these Maintenance Tanks. Choose what fits your needs and budget. We will be here for you to get them going and answer your questions. Works with the below EPSON printersET-8550ET-8500ET-16650ET-16600ET-5880ET-5850ET-5800WF-7845WF-7840WF-7830WF-7820WF-7310ST-C8090ST-C8000L15168L15160L15158L15150EC-C7000

Price: 59 USD

Location: Fremont, California

End Time: 2024-12-12T21:59:33.000Z

Shipping Cost: 5 USD