Description: Compatibility should be checked and confirmed before placing order!Steps of confirming the compatibilities:Manage "My Garage", and chose the right one when placing order;Or chose the "Year/Make/Model/Trim/Engine" of your vehicle on the compatible chart;Or Contact us if you have any question in confirming the compatibility, to make sure you will get the right and compatible item. Fitment 2004-2004 Ford Mustang 3.9L GAS 1997-2004 Ford Mustang 3.8L GAS Specification Inlet Diameter(inch): 1.50 Outlet Diameter(inch): 1.73 Package Weight(kg): 5.54 Package Size(inch):length×width×height: 33.46x6.69x22.44 Core Size(inch): 24.92x16.85x1.02 Interchange Part Number: 2138 Row Count: 1 Core Material: Aluminum Tank Material: Plastic Fitment Type: Direct Replacement Color: Silver Core, Black Tank Radiator Cap: No Style: Crossflow Compatibility: A/T radiator, without radiator cap ISO Specification: ISO 16949 Features Perfect radiator direct replacing part for car engine cooling system. Radiator is really easy to get damaged during delivery. We have upgraded packaging (EPE foam and cardboard）to prevent aluminum fins, plastic water tank and fitting parts from damage. EPE foam helps fix radiators to reduce wobble. Regularly clean your radiator to prevent clogging that may lower cooling efficiency. Don't mix different brands of coolant. Before you start up your vehicle, please make sure there is coolant in the radiator. Highly recommended to check car cooling system of the whole vehicle before professional installation. We are willing to provide 1 Year warranty service. Highest grade plastic tanks with aluminum core - made to withstand rust and wear. Leak tested & Sealing tested, durable and long-lasting. Direct Bolt-on Replacement with No Additional Time. With plastic cover to prevent dust during delivery. Louvered core fins increase waterflow and accelerate heat transfer to keep your engine running cool. An aluminum core and durable plastic tank prevent rust and corrosion while also limiting weight and promoting longevity. Wider tube or dimpled tube surface increases contact surface area for more efficient cooling. Our radiator is suitable for standard vehicles, not for modified car/vehicles. How to clean radiator:1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification. How to replace the radiator:1. Disconnect the battery.2. Drain the radiator fluid into a suitable container.3. Remove the old radiator: -Take off any plastic covers around the radiator. -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly. -Disconnect the radiator hoses from the radiator. -Disconnect the transmission cooling lines from the bottom of the radiator. -Remove any clamps, brackets, or screws holding the radiator inside its frame. -Lift the radiator up and out of the car.4. Install the new radiator: -Slide the new radiator into place. -Connect any clamps or brackets that hold the radiator in place. -Connect the transmission cooling lines carefully. -Connect the engine cooling hoses to the radiator. -Replace the fan and fan shroud. -Reconnect the fan electrical connection. -Replace the plastic covers.5. Fill the radiator with fluid.6. Check your work to make sure that there are no leaks.(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)Note: Do please keep children and pets away when replacing the radiator) Note:1. Project operation, the vehicle normal temperature 60 to 80 degrees.2. Add detergent if the tank is too full can take some antifreeze.
Price: 70.61 USD
Location: Chino, California
End Time: 2024-12-26T08:51:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Language: English
Brand: Autohai
UPC: Does not apply
Type: Radiator
Color: Silvery
Material: Aluminum
Row Count: 1
Placement on Vehicle: Engine Compartment, Front
Manufacturer Part Number: 2138
Manufacturer Warranty: 1 Year
Universal Fitment: No
Inlet / Outlet Diameter: 1.5"/1.73"
Core Dimensions: 24.92"x16.85"x1.02"
Package Dimensions: 850x170x570mm(33.46"x6.69"x22.44")
Item Width: 1.02"(Core Thickness)
Interchange Part Number: 2138
Fitment Type: Direct Replacement
Features: 100% Leak Tested, Crossflow Radiator, Durability Tested
