CAR RUBBERIZED UNDERCOATING SPRAY PAINT Black 15 oz Rust-Oleum Automotive 6-PACK

Description: CAR RUBBERIZED UNDERCOATING SPRAY PAINT Black 15 oz Rust-Oleum Automotive 6-PACK NOTE: We don't send item to Stock address (address of other shipping company for send item to international buyer) and PO box address. All order use Stock address and PO box address will be cancel. Please don't make order. Thanks! Black, Rust-Oleum Rubberized Undercoating Spray Paint-248657, 15 oz: Is an easy-to-use black rubberized protective coating. It provides corrosion protection from water, salt and other chemicals. Its helps deaden sound and provides a barrier against rust on cars, trucks, trailers and other recreational vehicles. Use on bare or primed metal on the underbody of cars, trucks, trailers and other recreational vehicles.Resists rustPaintableProtects against corrosion and moistureStops Rust Formula prevents corrosion and rustFor use on wheel wells and automotive underbodiesDANGER! EXTREMELY FLAMMABLE. VAPOR HARMFUL. VAPORS MAY CAUSE FLASH FIRE. CONTENTS UNDER PRESSURE. DANGER: TOLUENE. Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. DO NOT PUNCTURE, STRIKE, OR INCINERATE (BURN) CONTAINER. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120°F. NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. VAPORS MAY IGNITE EXPLOSIVELY. Keep away from heat, sparks and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. USE ONLY WITH ADEQUATE VENTILATION. Do not breath dust, vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Follow respirator manufacturer's directions for respirator use. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. WARNING: This product contains a chemical known in the state of California to cause cancer and birth defects or other reproductive harm. KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL. DO NOT STORE ABOVE 120 F (48 C)Surface Preparation: Remove all rust, oil and grease from surfaces to be coated. Surface must be clean and dry. Mask off area to avoid overspray on auto finish. Apply to bare or primed metal surface.Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use.Hold can 12 - 16” from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying.Remove any overspray from the auto finish immediately.For the best results, apply two coats (allow product to dry for 1-2 minutes between coats).Air dry for a minimum of one hour.Clogging: If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other object in the steam.

Price: 45.99 USD

Location: Marysville, Washington

End Time: 2024-12-29T16:32:01.000Z

Shipping Cost: 0 USD