CONTEC 12 Lead Electrocardiograph Digital 1/3/12 Channel ECG/EKG FDA Fedex

Description: Digital 1/3/12 Channel ElectrocardiographTo US address, shipping from USA Warehouse with Fedex 2-8 days,to other countries, shipping from China with express shipping with 7-19 working days. Description Introduction ECG90A is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in: recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for "Lead off" or "Lack of paper", optional interface languages(Chinese/English), case database management. Function 1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal. 2)Particular and high-accurate digital filter eliminates baseline drift, no distortion to ECG waveform, greatly enhances anti-baseline drift capacity, convenient for waveform judgment. 3)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing. 4)Real-time and continuously record the clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.). 5)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz. 6)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden. 7)Optional SD card stores up to 100 cases, which is convenient for doctor to review case and statistic. 8)In review mode, case waveform stored can be checked, measurement parameter and diagnosis information can be automatically analyzed. 9)Two languages(Chinese or English) interface and report. 10)Optional ECG-Sync software, connect with PC by USB2.0 interface to form a ECG workstation, collect real-time data to the software for analyzing and printing the report, and old cases stored in Electrocardiograph can be uploaded to PC. 11)Power supply: AC/DC, and in optimal DC state, built-in rechargeable lithium battery can continuously work for 4-hour, print up to 90-minute and 150-ECG, which meets the requirements of visiting a patient at home and body examination. Rechargeable lithium battery is detachable, which is convenient for user to replace and charge in any time. Performance Input mode: floating and defibrillation protection Frequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB) CMRR: >60dB, >100dB(add filter) Time constant: ≥3.2s Patient leak current: <10µA Calibration voltage: 1mV Sensitivity: 5, 10, 20 mm/mV ±5%, standard sensitivity: 10mm/mV±2% Noise level: ≤15µVp-p Input circuit current: ≤50nA Input impedance: ≥50MΩ Sampling accuracy: 12-bit Safety classification: class I, type CF and defibrillation-proof applied part Recording mode: thermal printing system Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1) Paper size: 50mm(W)×20m(L) Sampling frequency: 1000Hz Polarizing voltage: ±500mV EMG interference filter: 25Hz/35Hz (-3dB) Power frequency filter: AC 50Hz/60Hz(-20dB) Paper speed: Auto: 6.25, 12.5, 25, 50mm/s, ±5% Manual: 6.25, 12.5, 25, 50mm/s, ±5% Power supply: DC 12V adapter, 7.4V/2000mAh rechargeable lithium battery Waterproof degree: IPX0 Working mode: continuous working Accessories Standard: A lead cable A limb electrode A chest electrode A thermal recording paper A power cord An earth wire A user manual A power adapter ECG-Sync software+USB cable ECG electrode SD card Physical characteristic Working environment Temperature: 5℃~40℃ Relative humidity: 25%~95%(non-condensing) Atmospheric pressure: 700hPa~1060hPa Transport and storage environment Temperature: -40℃~+55℃ Relative humidity: ≤95% Atmospheric pressure: 500hPa~1060hPa Dimension: 207mm(L) × 96mm(W) × 62mm(H) IntroductionECG100G is a kind of single channel electrocardiograph, which features in printing ECG waveform by thermal printing system, prompting for "Lead off" or "Lack of paper", multi-language interface, recording ECG waveform in AUTO/Manual mode, convenient to operate.Function1)Adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.2)Adopt high-resolution thermal printing system(8 dot/mm), no need for any adjustments. Recording frequency: up to 150Hz.3)Real-time and continuously record clear and accurate ECG waveform and annotation character(including lead mark, sensitivity, paper speed and filter state, etc.).4)In AUTO mode, finish recording by pressing the button once, which improves work efficiency.5)Multi-language (Chinese, English, French, Italian, German, Spanish, Turkish, Russian and Kazakh) interface and report.6)In optimal DC state, up to 7-hour standby time, continuous print up to 4-hour, record up to 150 pieces of ECG waveform.PerformanceInput mode: floating and defibrillation protectionFrequency response:Rated input amplitude Input frequency and waveform Relative output response1.0 0.67Hz~40Hz, Sine wave ±10%a0.5 40Hz~100Hz, Sine wave +10 %, -30 %a0.25 100Hz~150Hz, Sine wave +10 %, -30 %a0.5 150 Hz ~ 500 Hz, Sine wave +10 %, -100 %a1.5 ≤1Hz,200ms, Triangle wave +0 %, -10 %ba relative to 10Hz b relative to 200 msTime constant:≥ 3.2sCMRR: >105dBFilter: power frequency(AC50/60 Hz), EMG(25 Hz/35 Hz (-3 dB)), baseline drift filterRecording way: thermal printing systemSpecification of recording paper: 50 mm(W)×20 m(L) high-speed thermal paperTime base selection(paper speed): 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s, error: ±5%Gain control(sensitivity): 2.5, 5, 10, 20 mm/mV, accuracy is ±2%; Standard sensitivity: 10 mm/mV±0.2 mm/mVRecording mode: auto mode and manual modeSafety classification: Class I, type CF defibrillation-proof applied partPolarization resistance voltage: ±610mVNoise level: ≤12 µVp-pECG signal input sampling frequency: 32 kHzWaveform data processing sampling frequency: 1 kHzSampling accuracy: 24-bitThe minimum detection signal: 10 Hz, 20 µV(peak-peak value) deflected sinusoidal signal can be detectedAccuracy of input signal: ±5%Amplitude quantization: ≤5µV/LSBInterchannel time deviation: <100 µsPower supply:AC: 100V~240V(50/60Hz)DC: 7.4V/2000mAh rechargeable lithium batteryDegree of protection against ingress of liquid: IPX0Working mode: continuous workingAccessoriesStandard configuration:A lead cableA limb electrodeA chest electrodeA thermal recording paperA power cordAn earth wireA user manualPhysical characteristicWorking environmentTemperature: 5℃~40℃Relative humidity: 25%~95%(non-condensing)Atmospheric pressure: 700 hPa~1060 hPaTransport and storage environmentTemperature: -20 ℃～+55 ℃Relative humidity: ≤95%Atmospheric pressure: 500 hPa~1060 hPaDimension: 315mm(L)×215mm(W)×77mm(H)Net weight: 1.5Kg Introduction ECG300G is an Electrocardiograph which can collect 12-lead ECG signal and print waveform by the thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting any rhythm lead, case database management. Function 1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.3)Multiply printing modes and formats, including manual, auto 4×3, auto 3×4+1, auto 3×4, auto 2×6+1, auto 2×6, auto 3-2+1, auto 3-2, auto 1×12+1, auto 1×12, rhythm 4, rhythm 3 and rhythm 2, etc. Waveform length printed can be adjusted, and with time print function, which meets different requirements.4)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.5)Built-in memory stores up to 1000 cases, convenient for case review and statistic.6)Multi-language(Chinese, English, Spanish, Turkish, Polish, Italian, French, German, Portuguese, Kazakstan, Russian, Ukrainian, Serbian and Slovenian) interface and report. Performance Input mode: floating and defibrillation protectionFrequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB)CMRR: >60dB, >100dB(add filter)Time constant:≥ 3.2sPatient leak current: <10µACalibration voltage: 1mVSensitivity: 2.5, 5, 10, 20, 40 mm/mV ±5%, standard sensitivity: 10mm/mV±2%Noise level: <15µVp-pInput circuit current: ≤50nAInput impedance: ≥50MΩSampling accuracy: 12-bitSafety classification: class I, type CF and defibrillation-proof applied partRecording mode: thermal printing systemAuto record: set record according to auto record format and mode, automatically switching leads, measuring and analyzing.Rhythm record: set record according to rhythm record format and mode, automatically measuring and analyzing.Manual record: set record according to record format, manually switching leads.Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1)Paper size: 80mm(W)×20m(L)Sampling frequency: 1000HzEMG interference filter: 25Hz/35Hz (-3dB)Power frequency filter: AC 50Hz/60Hz(-20dB)Paper speed: Auto: 25, 50mm/s, ±5%Rhythm: 25, 50mm/s, ±5%Manual: 5, 6.25, 10, 12.5, 25, 50mm/s, ±5%Power supply: AC: 100V~240V(50/60Hz)DC: 7.4V/3500mAh rechargeable lithium batteryFuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250VWaterproof degree: IPX0Working mode: continuous working Accessories Standard:A lead cableA limb electrodeA chest electrodeA thermal recording paperA power cordAn earth wireA user manualECG-Sync software+USB cable Optional: ECG electrodeBag Conductive gel Physical characteristic Working environmentTemperature: 5℃~40℃Relative humidity: 25%~95%(non-condensing)Atmospheric pressure: 700hPa~1060hPaTransport and storage environmentTemperature: -40℃~+55℃Relative humidity: ≤95%Atmospheric pressure: 500hPa~1060hPaDimension: 315mm(L) × 215mm(W) × 77mm(H)Weigh: 1.6Kg Weigh: 0.5Kg Introduction ECG1200G is an electrocardiograph which can collect 12-lead ECG signal simultaneously and print ECG waveform with thermal printing system. It features in, recording and displaying ECG waveform in AUTO/Manual mode, measuring and diagnosing ECG waveform parameters automatically, prompting for “Lead off” and “Lack of paper”, multi-language interface, AC/DC, selecting rhythm lead, printing the trend chart and histogram of P-R interval, case database management.Function 1)Sync collection for 12-lead ECG, adopt digital signal processing technology and get high-quality ECG waveform via power frequency filter, baseline filter and EMG filter of ECG signal.2)Display of 3/6/12-lead ECG, print mode, sensitivity, paper speed and filter state, etc. on one screen, convenient for contrastively diagnosing.3)Multiply printing modes and formats, including auto 12x1, auto 6x2+1, auto 6x2+1_H, auto 6x2, auto 6x2_H, auto 3x4+1, auto 3x4+2, rhythm 12, rhythm 10, rhythm 8, rhythm 6, manual, etc. Trend chart and histogram of P-R interval can be printed, waveform length printed can be adjusted, and with time print function, which meets different requirements.4)Paper speed: 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s.5)With the functions of auto-analysis and auto-diagnosis for routine ECG parameters, provide measurement results and auto-diagnosis conclusion for HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1), etc. which reduces the doctor’s burden.6)Built-in memory stores up to 1000 cases, convenient for case review and statistic.7)Multi-language(Turkish, French, Chinese, English, German, Kazakstan, Polish, Portuguese, Russian, Slovenian, Spanish and Ukrainian) interface and report.8)In optimal DC state, up to 10-hour standby time, continuous print more than 3-hour, record up to 300 ECG waveform(commonly, it is 3s case), which meets the requirements of visiting a patient at home and body examination. PerformanceInput mode: floating and defibrillation protectionFrequency response: 0.05Hz ~ 150Hz(-3dB~+0.4dB)CMRR: >60dB, >100dB(add filter)Time constant:≥ 3.2sPatient leak current: <10µACalibration voltage: 1mVSensitivity: 2.5, 5, 10, 20, 40 mm/mV ±5%, standard sensitivity: 10mm/mV±2%Noise level: ≤15µVp-pInput circuit current: ≤50nAInput impedance: ≥50MΩSampling accuracy: 12-bitSafety classification: class I, type CF and defibrillation-proof applied partRecording mode: thermal printing systemPaper size: 210mm(W)×20m(L)Sampling frequency: 1000HzEMG interference filter: 25Hz/35Hz (-3dB)Power frequency filter: AC 50Hz/60Hz(-20dB)Paper speed: Auto: 25, 50mm/s, ±5%Rhythm: 25, 50mm/s, ±5%Manual: 5, 6.25, 10, 12.5, 25, 50mm/s, ±5%Auto record: set record according to auto record format and mode, automatically switching leads, measuring and analyzing.Rhythm record: set record according to rhythm record format and mode, automatically measuring and analyzing.Manual record: set record according to record format, manually switching leads.Measurement parameters: HR, P-R interval, P Duration, QRS Duration, T Duration, Q-T interval, Q-Tc, P Axis, QRS Axis, T Axis, R(V5), S(V1), R(V5)+S(V1)Power supply: AC: 100V~240V(50/60Hz)DC: 14.8V/3500mAh rechargeable lithium batteryFuse specification: two AC time lag fuse(φ5×20mm), T1.6AL250VWaterproof degree: IPX0Working mode: continuous workingAccessoriesStandard:A lead cableA limb electrodeA chest electrodeA thermal recording paperA power cordAn earth wireA user manual ECG-Sync software+USB cable ECG electrodeUSB cable Physical characteristicWorking environmentTemperature: 5℃~40℃Relative humidity: 25%~95%(non-condensing)Atmospheric pressure: 700hPa~1060hPaTransport and storage environmentTemperature: -40℃~+55℃Relative humidity: ≤95%Atmospheric pressure: 500hPa~1060hPaDimension: 340mm(L) × 320mm(W) × 85mm(H)Weigh: 3.2KgBuy Safe Product!The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE &TUV of Europe. Payment We accept payment by PayPal. PayPal enables you to make payment quickly and securely online. 1: We accept payment via PayPal. 2: Please pay the money within 5 days after the auction ended. 3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely. Shipping 1). We will ship within 2 business day after your payement ; We ship the item by USPS first class service for USA buyers,you can get the item in 1-5 days. We ship the item by EUB(epacket) for CA,AU,UK,RU buyers.you can get the item in 10-25 days. We ship the item by Registered China Post Air Mail for the other buyers,you can get the item in 30-35 days. 2).We don't add taxes, VAT or other hidden charges. You pay us what you see on the invoice, i.e. goods subtotal + shipping cost (not include duties). Please find out as much as you can about your import taxes in your own country before bidding the item. You need to pay for the import duties in case that occurred for certain goods, or you may kindly give us some suggestions about that, we promise to do our best to help you! Terms of Sale About Warranty: We guarantees new equipment other than accessories to be free from defects in workmanship and materials for a period of twelve months (six months for spare parts) from the date of shipment under normal use and service. Our company's obligation under this warranty is limited to repairing, at our company's option, any part which upon our company's examination proves defective. Return Policy: If you receive a defective item which you want to return, please contact us within 5 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return. We will refund the money to you when we get the return items. Or replace item for you free of charge. About Us Contec Medical Systems focusing on research, manufacture and distribution of medical instruments,was founded in 1992 as a high-tech company. At present there are more than 1200 employees in our company.Our product line covers a wide range of 13 categories. Most of the domestic hospitals are our customers. Contec hopes to cooperate with international companies to supply more innovative design and advanced technology products We sincerely welcome you to become one of our global partners.We are looking forward to establishing a successful business relationship with you. If you have any questions or Dissatisfaction, please contact us via ebay message, we will try our best to help you to solve the problem and give you satisfied answer Contact Us Contec Medical Systems Contact name: YokiContec Medical Systems Co.,Ltd; 20 Years manufacturer,we have stock in USA and China. Powered by SoldEazy We only have the English Manual in the standard package, If you need any other language Manual, please contact us freely This product is sold worldwide, if you are using it in the United States, please contact me before purchasing.

Price: 299 USD

Location: 1440 Chase Ave. Elk Grove Village

End Time: 2025-01-28T03:30:02.000Z

Shipping Cost: 0 USD