CRESTRON QM-AMP3X80MM Professional Multimedia Audio Amplifier 3-Channel 80W

Description: CRESTRON QM-AMP3X80MM Professional Multimedia Audio Amplifier 3-Channel 80W This unit is pre-owned, but is in good, working condition. It came from working inventory from a local business that recently upgraded their equipment. It has obvious cosmetic wear and tear such as scratches and scuffs as evidenced in the photos. This unit comes with a power cord. Please research this unit and ask any questions you may have before purchasing. Please be aware that your unit will be pulled at random from a lot, so your unit may have different markings than the one pictured above, but the model and condition are the same. We are unable to "cherry pick" you a unit. Below are the specs from the manufacturer's website: https://www.crestron.com/Products/Inactive/Discontinued/N-Z/QM-AMP3X80MM Audio – Channel 1 Output Power80 watts at 70 Volts Power Bandwidth75 watts, 100Hz to 20kHz THD<0.1%, 1kHz Frequency Response100Hz to 20kHz +0/-3dB S/N Ratio110dB below rated output power, A-weightedAudio – Channels 2 - 3 Output Power80 watts per channel at 8 ohms;110 watts per channel at 4 ohms Power Bandwidth75 watts, 20Hz to 20kHz at 8 ohms;95 watts, 20Hz to 20kHz at 4 ohms THD<0.1%, 1kHz at 1 watt into 8 and 4 ohms;<0.1%, 1kHz at 75 watts into 8 ohms;<0.2%, 1kHz at 100 watts into 4 ohms Frequency Response20Hz to 20kHz +0/-0.5dB S/N Ratio110dB below rated output power, A-weighted Damping Factor>150 (4/8 ohm outputs)Connectors INPUTS SPCH, L, & R(3) 3-pin 3.5mm detachable terminal blocks;Balanced line-level audio inputs;Input Impedance: 19k ohms balanced, 9.5k ohms unbalanced;Input Sensitivity: 1.2 Vrms for rated power (80W at 8 ohms);Common Mode Rejection: >70dB below 1kHz OUTPUTS SPCH 70V(1) 2-pin 5mm detachable terminal block;70 Volt speaker-level audio output;Output Power: 80 watts at 70 Volts OUTPUTS 4/8Ω(2) 2-pin 5mm detachable terminal blocks;4/8 ohm speaker-level audio outputs;Output Power: 80 Watts/Ch. @ 8 ohms, 110 Watts/Ch. @ 4 ohms NET(1) 4-pin 3.5mm detachable terminal block;Cresnet slave port, connects to Cresnet control network Ground(1) 6-32 screw, chassis ground lug FuseMain fuse holder; 5 Amps, 250 Volts, time lag 120V ~50-60Hz(1) IEC Socket, main power input;Mates with removable power cord, includedControls & LED Indicators POWER (front)(1) Toggle switch with (1) green LED, enables/disables main power PWR (rear)(1) Toggle switch, selects between BYPASS mode for standalone operation and NET CONTROL mode for control via Cresnet PWR (rear)(1) green LED, indicates 24 Volts DC power supplied from Cresnet control network NET (rear)(1) yellow LED, indicates communication with Cresnet system SETUP (rear)(1) miniature pushbutton and (1) red LED, used for touch-settable ID (TSID)Power Requirements Main Power120 Volts AC +15%/-25%, 50-60 Hz, 500 Watts Cresnet Power Usage3 Watts (0.125 Amp @ 24 Volts DC)Environmental Temperature32° to 104°F (0° to 40°C) Humidity10% to 90% RH (non-condensing)Enclosure ChassisSteel, black matte powder coat finish, convection cooled, vented top and sides FaceplateExtruded aluminum, black matte powder coat finish with polycarbonate label overlay MountingFreestanding or 1U 19-inch rack-mountable Please thoroughly review the description, photos, and return policy BEFORE purchasing! Domestic shipping is available via the United States Postal Service, FedEx, or UPS (whichever is most economical). International shipping is available via the Global Shipping Program. Feedback is left automatically by the system upon you leaving feedback for us. Please be sure to ask any and all questions BEFORE placing your order. There will be NO RETURNS, NO REFUNDS and NO CANCELLATIONS... NO EXCEPTIONS.

Price: 79.95 USD

Location: Butler, Indiana

End Time: 2025-01-17T14:40:28.000Z

Shipping Cost: N/A USD