Crown CDI2300 Power Amplifier NCDI2X300-U-US CDi2x300 *DEMO Open Box Display*

Description: Crown CDI2300 Power Amplifier CDi2x300 The 300W Crown Audio CDi 2|300 2-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|300 offers streamlined functionality for most small- to medium-sized installations such as restaurants, retail stores, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 2-channel amplifier is simple to use and includes a network control and monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs. DriveCore Technology: patented DriveCore integrated circuit combines hundreds of discrete circuits into one chip for better performance, lower power consumption, and improved reliabilitySupports configuration and control using HiQnet Audio ArchitectMonitoring and control over TCP/IPColor LCD and front-panel user interface for amplifier configuration, control, and monitoringProgrammable GPIO (general purpose input/output) control portDigital signal processing (input/output EQ filters, crossover, input/output delay, LevelMAX limiters)Support for importing of FIR filter coefficients20 device presets—1 factory and 19 user96 kHz/32-bit floating-point signal processingUniversal power supply with PFC for reduced current draw and industry-leading efficiencyPower saving modesRemote power off—Sleep mode activated via AUX port70/100Vrms direct driveEach channel independently configurable for low Z or high Z operationAdvanced protection circuits—amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/undervoltage, and high-frequency overloadThree-year, no-fault transferable warranty—your investment is fully protectedComplies with GreenEdge by HARMAN—environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operationSupport for BSS Audio Soundweb Contrio Ethernet wall controllersIncluded speaker tuning for various JBL speaker models CDI2X300 Specs | Product Specifications AmplifierNumber of Channels 2Power Rating 300 W per Channel600 W BridgedLoad Impedance / Voltage Stereo:2 / 4 / 8 / 16 Ohms per Channel70 / 100 V per ChannelBridged:4 / 8 / 16 Ohms140 / 200 V Performance Protections DC Fault, Low Impedance, Open Circuit, Overcurrent, Overvoltage, Ultrasonic, UndervoltageFrequency Response 20 Hz to 20 kHz ±0.5 dB (8 Ohms)Damping Factor > 1000Input Sensitivity Line:0.7 Vrms to 2.5 Vrms / -.8 dBu to 10.2 dBu (at 8 Ohms)1 Vrms to 3.5 Vrms / 2.2 dBu to 13.2 dBu (at 70 V)1.4 Vrms to 5 Vrms / 5.2 dBu to 16.2 dBu (at 100 V)Input Impedance 20 Kilohms (Balanced)10 Kilohms (Unbalanced)Max Gain 34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V)Max Input Level +20 dBuSNR > 104 dBTHD 0.35% (at Rated Power)Intermodulation Distortion ≤ 0.35%Crosstalk > 80 dB (Below Rated Power)CMRR > 70 dB Signal Processing DSP 32-Bit Floating Point DSP at 96 kHzAudio Delay Adjustable Up to 1000 ms per ChannelCrossover High-Pass:16 to 20 kHz, 12/24/48 dB/Octave BesselHigh-Pass:16 to 20 kHz, 6/12/24/48 dB/Octave ButterworthHigh-Pass:16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-RileyLow-Pass:16 to 20 kHz, 12/24/48 dB/Octave BesselLow-Pass:16 to 20 kHz, 6/12/24/48 dB/Octave ButterworthLow-Pass:16 to 20 kHz, 12/24/48 dB/Octave Linkwitz-RileyEQ8-Band Parametric EQ per ChannelLimiting Yes ConnectivityAnalog Audio I/O 1 x Block 6-Pin Balanced Line Input1 x Barrier Strip 4-Pin Speaker OutputDigital I/O 1 x RJ45 Ethernet Input/Output (Control) Power AC Input Power Universal:100 to 240 VAC, 50 / 60 HzAC Power Connector 1 x IEC 15 A / NEMA 5-15Current Consumption 120 VAC:1.1 to 1.4 A (1/8 Power)1.9 to 2.8 A (1/3 Power)230 VAC:0.7 to 0.8 A (1/8 Power)1.1 to 1.5 A (1/3 Power)Power Consumption120 VAC:80 to 97 W (1/8 Power)99 to 138 W (1/3 Power)230 VAC:102 to 119 W (1/8 Power)115 to 381 W (1/3 Power) Physical Display & Indicators Front Panel:1 x Multi-Color Graphic LCDRackmount Size 2 RUCooling Fan (Variable Speed)Thermal Dissipation 512 BTU/hr (Maximum)Dimensions 19.0 x 3.5 x 12.2" / 48.3 x 8.9 x 31.1 cmWeight 14.5 lb / 6.6 kg 19 lbs. / 19 x 8 x 22

Price: 749 USD

Location: Jamaica, New York

End Time: 2024-12-09T17:59:49.000Z

Shipping Cost: 0 USD