Description: DSLRKIT PSE4P1UGK Gigabit PoE+ Switch 5 Ports (1Uplink, 4 PoE) 10/100/1000Mbps IEEE 802.3af/802.3at Endspan PSE(1,2+/3,6-) Auto Detection Powered Device Input DC48V~57V power supply (Power supply not included) Wall Mount It is easy to connect. With data and power over Ethernet from one unit, the PoE Switch reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. Providing 4 PoE interfaces, the Switch is ideal for small businesses and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost-effectively. Compatible all 802.3af/802.3at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More..... Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port Features: Supports Virtual LAN(VLAN) ON/OFF (When the VLAN mode is enabled, all PoE ports support VLAN isolation, the traffic are isolated from each other, improve the network safety.) Up to 30w/port of Power on Complies to IEEE 802.3af/802.3at PoE standard Compatible with All IEEE 802.3af/802.3at Safe: Low power Devices Receive Only the Power They Need Safe and Reliable Power to WLAN Access Points Automatic detection of PoE power devices, non-PoE devices can be securely connected to the switch any network port Supports 10/100/1000 Base-T Compact Design Fits Easily in WLAN Access Plug-and-Play no configuration required Each port supports auto MDI/MDIX Specification: ALL LAN/WAN Port: Standard 1000Mbps Ethernet port. can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5e/6 cable。 LAN Port 1-4: any supported IEEE802.3af PoE Powered Device and Automatic Detection and Protection None PoE Powered Devices (PDs) Virtual LAN: ON/OFF LED Power (Red) PoE In-Use and 1000 LNK / ACT(Orange LAN Port) 10/100 LNK / ACT(Green) Product Dimensions 132mm W x 66mm D x 32mm H Weight 270g(only switch) Power Requirement 5.5x2.1 Jack Input Voltage 48~57V DC PoE Standard IEEE 802.3af, IEEE802.3at PoE Power Output 48V-57VDC, Max. 30Watt/port PoE Power Supply Type pin 1 & pin 2 (Power +) ; pin 3 & pin 6 (Power -), Mode-A, Endspan Regulation Compliance FCC Part 15 Class A, CE Operating Temperature: 0~50 Degree C, Relative Humidity: 20~95% Storage Temperature: -10~70 Degree C, Relative Humidity: 20~95%(non-condesing) Standards Compliance IEEE 802.3: 10Base-T IEEE 802.3u: 100Base-Tx IEEE 802.3z: 1000Base-Tx IEEE 802.3x: Flow Control Item Included: DSLRKIT PSE4P1UGK PoE switch x1(with Retail Box) (Power supply not included) 12 Months Warranty from the date of purchase.
Price: 20.99 USD
Location: Shenzhen
End Time: 2024-08-11T09:40:08.000Z
Shipping Cost: 3.5 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: PSE4P1UGK
Custom Bundle: No
Number of LAN Ports: 5
Layer: 2
Ethernet Technology: Gigabit Ethernet (1000-Mbit/s)
Type: Ethernet Switch
MPN: Does not apply
Brand: DSLRKIT
Form Factor: Standalone
Country/Region of Manufacture: China
Network Management Type: Unmanaged
Non-Domestic Product: No
Modified Item: No
Maximum Data Transfer Rate: 1000 Mbps/1 Gbps
