Dual Clutch Transmission Remover Tool Kit For Ford DPS6 Dual Clutch Reset Tool

Description: Dual Clutch Transmission Remover Tool Kit For Ford DPS6 Dual Clutch Reset Tool Product DescriptionDisassembly lock instructions： Step 1: Disassemble the double clutch fixing snap ring, install and remove the three claws and pull out the double clutch. Step 2: Put the double clutch into the base of the tool, insert the cylinder into the base with the inside facing up, and place the two tool wrenches in the appropriate position. Tap the two wrenches to pinch them (the two wrenches are pinched when locked, you can use a hard object to pat them loose). Step 3: Take out the dual-clutch locking tool Ⅰ to align the base, screw in the screw and knead the two wrenches, unscrew the bearing nut on the screw, and release the wrench into the three-side clamping slot when it is in position Locking tool Ⅰ. Step 4: Install the locking tool Ⅱ and align it with the appropriate slot to fit it into the base cylinder. Screw in the screw, pinch the two wrenches, and unscrew the bearing nut. When you hear a few crackling sounds, remove the locking tool Ⅱ and see if the internal card slot enters the round hole . If not, continue to step 4. At this point, the dual clutch tool has been locked and can be installed at any time. Instructions for installing an unlock lock： Step 1: Insert the locked double clutch, put it into the mounting sleeve, install the extension feet on three sides to fix the proper holes, and fix the extension feet. Unscrew the screw and observe whether it is in place. When in place, remove the tool and install the retaining ring. Step 2: Remove the motor on both sides, use the hexagonal tool to insert the motor teeth, and rotate it counterclockwise to the end (there is a popping sound when rotating, and the double clutch slightly pops up). Turn the other side counterclockwise again. Finally install the motor. At this point, the dual clutch has been unlocked and can be loaded. Package Included: 1 Set Double Clutch Transmission Remover Installer Tool Kit Payment PolicyReturns PolicyContact usPayment PolicyWe accept PayPal and all forms of credit card. We will only ship to the confirmed Paypal shipping address given with the payment. We do not offer local pick up service.Returns Policy◆ 30 Days easy returns satisfaction guarantee. ◆ Items to be returned must be in original factory condition. ◆ Please enclose a note about item number and order id, your eBay ID and the reason of return.Contact usWe can be reached by eBay message, please feel free to contact us about your question, but DO Not open dispute or give bad feedback. Give us one chance to get problem solved Friendly. Again, Thanks for your looking and valuable business. Copyright © 2023 Dianxiaomi

Price: 122.99 USD

Location: Ontario, California

End Time: 2024-11-25T03:22:54.000Z

Shipping Cost: 0 USD