Energy Meter Two Way 1, 2 Channel with Current Transformer Clamp Monitor Power

Description: App can display Channel A and B Real-time power, current, voltage for Forward and Reverse direction clearly Calibration The device allows to calibrate by adjusting the percentage 2 Channels For Reverse and Forward direction 1 Channle or 2 Channels are available to Choose And you can read from App for each Channel - Real-time total power of 2 channels of reverse and forward direction - Power for Channel A and B Separately(W) - Current(mA) - Voltage(V), - Power factor, and Frequency(Hz) Electricity Statistic for each channel in Forward and Reverse direction. Hourly Elec. (KWh) Daily Elec. (KWh), Monthly Elec. (KWh) -Yearly Elec. (KWh) Technical data: Rated Voltage:100-240V AC 50/60Hz Measurable Current Range: 0.2A-80A Protocal: ZigBee WiFi Frequency: 2.4GHZ (Not Support 5Ghz) Ambient Temperature Range:-10°C ~ 55°C Electricity Statistic Channel A , B Separately and Total daily monthly, yearly Reverse and Forward Direction Automation , It allows to make a Scene for this device working with other tuya devices For example, when the reverse or forward power (watts) or KWh reaches a value, the other tuya switch can turn on , or turn off Wiring Diagram 1. To measure the power 'from Grid' and 'To Grid' Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module. 2. Measure the power consumption. Please note to make sure the circuit mesaured is in the same phase as the circuit power to the module. Non-connect to Be Safe, Easy and Safe to Install No need to change the wires, Just put the wire into the clamp, then it can measure, very easy. Small Size Module , Easy to Install

Price: 37.32 USD

Location: China

End Time: 2025-01-08T07:34:29.000Z

Shipping Cost: 0 USD