Description: Engine Model Hit & Miss Water Cooled Gasoline Internal Combustion & Accessories Features:This is a Hit and Miss engine model, utilizing an old-fashioned design with water cooling. The engine is mounted on a base for simple placement and operation, equipped with fuel tank lines and ignition system, and is ready to run. The engine will be more admired when operational.Startup steps:(1) Verify the engine wiring, connect the fuel tank and oil line, and install the battery (ignition voltage 6-7.4V). (2) Fill the fuel tank with 95# gasoline. When securing the fuel tank, ensure that the minimum fuel level in the pipe is not lower than the carburetor. (3) Check whether the screws on the model are loose and whether the throttle is closed. After the inspection is completed, about 3/4 of the cold water needs to be added to the cooling water tank. (4) Turn on the power switch, then rotate the flywheel and start the engine counterclockwise on the right side of the engine.Notes:(1) If there is air in the fuel line, please squeeze the air out to fill the fuel line with gasoline. (2) Please be careful not to open the throttle too wide before starting. After starting the model, adjust the throttle suitably to make the model run smoothly. (3) If the startup is not smooth, add 2-3 drops of engine oil to the carburetor inlet and adjust the throttle accordingly. Packing ListGasoline engine modelFuel tankCDI igniterHall switchInstruction manual
Price: 360.05 USD
Location: Shenzhen
End Time: 2025-01-30T18:23:29.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Unbranded
Type: Module
Assembly Status: Ready to Go/Pre-built
Unit Type: Unit
Color: Blue
Voltage: 6-7.4V
Features: Limited Edition, With Stand
Age Level: 12-16 Years & UP
Country/Region of Manufacture: China
