F56A1 Manual Backwash Control Valve for water treatment, US Stock ⬇read⬇

Description: !!! ATTENTION !!! Originally this Control Valve has BSPP (G) ports, that is not suitable for North American Market. For proper use in USA and Canada we strongly recommend to use BSPP x NPT trans-standards adapters. To purchase this Control Valve equipped with BSPP x NPT adapters follow the link: https://www.ebay.com/itm/145879937307?var=444938828086Why the use of adapters from metric to US standard is important in USA and Canada? The body of F56A1 Control Valve originally designed with BSPP (so named "metric") threads. NPT threads differ from BSP threads:- in the tooth angle, which is 60 degrees instead of 55, and the edges are more pronounced.- in the pitch: NPT threads have 11.5 threads per inch while BSP threads have 11 threads per inch. Other words they don't actually fit each other. So to prevent possible leaks along the threads and increase the reliability of your project, the use of adapters is a must. F56A Manual Multiport Filter Control ValveThe F56A manual multiport filter Control Valve features a flow rate of 17.6 GPM (4m³/h) and utilizes a corrosion resistant gasket for opening and closing functions. It can be used with tank sizes up to 1354, with heavy media like sand, and up to 1665 with GAC and/or Filter-AG. Control Valve has Service, Fast rinse, and Backwash modes, with manual operation. With a handle, you can switch the settings easily without turning off the pump or the power. When selecting a valve setting, make sure the handle arrow points to the desired mode directly (not in between two modes).If you have started backwashing your filter, always make sure you backwashed enough to get turbidity leave the tank. Usually it takes 6-10 minutes to backwash.Use additional flow restriction valve or a washer on the drain line to limit drain flow for NOT to wash out the tank media.As the name suggests, the Runxin manual filter control valve is operated by manually spinning the handle or hand wheel. Its handle can be turned 180 degrees and is available in both plastic and metal. For tanks that range in size from 8" to 13", the installation technique is top-mounted. The primary applications for the Runxin manual filter Control valve include carbon and sand filtration systems in homes, as well as swimming pool filtration, iron and manganese removal filtration, and pre-filtration systems for reverse osmosis treatment. ModelF56A1/A2（51104/51204）Handle materialMetal/plasticMount typeTop mountInlet/outletG-1"FDrainG-1"FMounting base2.5"-8NPSMRiser pipe1.05"ODFlow rate4m³/hFilter tank6"--12"Water pressure0.15-0.6MpaWater temperature5-50℃Water turbidity＜20FTUApplicationActivated carbon filter, sand filterFilter mediaQuartz sand, activated carbon

Price: 48 USD

Location: Palm Coast, Florida

End Time: 2024-09-20T05:23:02.000Z

Shipping Cost: 2 USD