1/48 B-29 Superfortress Pilot and Co-Pilot Seat 3D Printed Resin Upgrade 48200

Description: RESIN2detailHigh QualityFree ShippingCustomer Support1/48 B-29 Superfortress Pilot and Co-Pilot Seat 3D Printed Resin Upgrade NEW 1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades----------------------------------- Set comes with two (2) highly-detailed replacement pilot and co-pilot seats for the Monogram B-29 Superfortress kit in 1/48. 3D printed (see below) Some prior Experience handling 3D printed resin parts is highly recommended A few notes on 3D printed parts A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. This seat took me about 12 minutes to free from the support structures. I recommend starting with using a razor saw to carefully detach from bottom float, and then carefully work your way around the sides, snipping off the supports with shears. Trim nubs with sharp #11 and some sandpaper if you wish, to finish. Ships from USA. ------------------------------------Condition = Brand New Scale = 1/48 Manufacturer = RESIN2detail SKU = 48200------------------------------------Please check out my other aircraft kit and detail set listings! Thanks for looking! Choose from a Huge Selection of Top-Quality Model Kits and Accessory Brands! PaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer FREE shipping on Most orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three to five days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. High QualityFree ShippingCustomer Support1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades ----------------------------------- Set comes with two (2) highly-detailed replacement pilot and co-pilot seats for the Monogram B-29 Superfortress kit in 1/48. 3D printed (see below) Some prior Experience handling 3D printed resin parts is highly recommended A few notes on 3D printed parts A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. This seat took me about 12 minutes to free from the support structures. I recommend starting with using a razor saw to carefully detach from bottom float, and then carefully work your way around the sides, snipping off the supports with shears. Trim nubs with sharp #11 and some sandpaper if you wish, to finish. Ships from USA. ------------------------------------ Condition = Brand New Scale = 1/48 Manufacturer = RESIN2detail SKU = 48200 ------------------------------------ Please check out my other aircraft kit and detail set listings! Thanks for looking! RESIN2detail1/48 B-29 Superfortress Pilot and Co-Pilot Seat 3D Printed Resin Upgrade NEW 1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades----------------------------------- Set comes with two (2) highly-detailed replacement pilot and co-pilot seats for the Monogram B-29 Superfortress kit in 1/48. 3D printed (see below) Some prior Experience handling 3D printed resin parts is highly recommended A few notes on 3D printed parts A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. This seat took me about 12 minutes to free from the support structures. I recommend starting with using a razor saw to carefully detach from bottom float, and then carefully work your way around the sides, snipping off the supports with shears. Trim nubs with sharp #11 and some sandpaper if you wish, to finish. Ships from USA. ------------------------------------Condition = Brand New Scale = 1/48 Manufacturer = RESIN2detail SKU = 48200------------------------------------Please check out my other aircraft kit and detail set listings! Thanks for looking! Choose from a Huge Selection of Top-Quality Model Kits and Accessory Brands! Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer FREE shipping on Most orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it three to five days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. High QualityFree ShippingCustomer Support 1/48 B-29 Superfortress Pilot and Co-Pilot Seat Upgrades----------------------------------- Set comes with two (2) highly-detailed replacement pilot and co-pilot seats for the Monogram B-29 Superfortress kit in 1/48. 3D printed (see below) Some prior Experience handling 3D printed resin parts is highly recommended A few notes on 3D printed parts A sharp hobby knife will also be needed to carefully remove the support structures. Great care has been given to the design and build orientation to minimize layering and pesky support structure residue. It is recommended that the modeler take a slow and methodical approach here, to avoid broken resin parts. While not super brittle, the resin parts will crack under pressure, and are not as resilient as injection molded plastic. This seat took me about 12 minutes to free from the support structures. I recommend starting with using a razor saw to carefully detach from bottom float, and then carefully work your way around the sides, snipping off the supports with shears. Trim nubs with sharp #11 and some sandpaper if you wish, to finish. Ships from USA. ------------------------------------Condition = Brand New Scale = 1/48 Manufacturer = RESIN2detail SKU = 48200------------------------------------Please check out my other aircraft kit and detail set listings! Thanks for looking!

Price: 18.49 USD

Location: Hackettstown, New Jersey

End Time: 2023-09-15T03:25:32.000Z

Shipping Cost: 0 USD