Fender Japan STM-65G Medium Scale Safe Packing!

Description: 【Notice】※You cannot cancel an order after it has been placed and before it has been shiped.(Recently, there have been many cancellations after ordering.Please coisider carefully before purchasing.) 【Item Description】Fender Japan STM-65G Approximately 15 years have passed since it was last played. The scratches and marks are from the time of acquisition, showing signs of use, but with careful attention, it has become a good guitar. It has an elegant gloss and overall impression. Despite its age, the neck is clean, and the color combination from aging is beautiful. Please note that there may be points not covered in the comments or product photos that will be indicated as needed. If you have any concerns, please ask in the comments section. Thank you. Accessories:- Arm Bar (Non-Cap)- Back Panel (Original)- F/J Universal Soft Case -------------------------------------------------- This is a medium-scale Stratocaster made by Fender Japan, with a late-stage O-serial (1993-94). I have confirmed the following settings for the listing: - Gauge: 09-42- Tuning: Regular- Springs: 3 tremolo springs- Bridge: Slightly floating- String Height at 12th Fret: Approximately 2.0mm to 1.6mm The neck has a slight forward bow when set up. There are no issues affecting playability, with no buzzing through the amp output (acoustic sound is within acceptable range). The truss rod has not been adjusted since acquisition (around 2000), but for the listing, I have checked and confirmed adjustments up to about 60 degrees on each side without putting undue stress on the neck. As long as there are no extreme string height adjustments or downtuning, it should be stable and problem-free in its current state.It's worth noting that this series has a thin and narrow neck, so adjusting the rod too easily could potentially strain the neck. If you lack knowledge in this area, it might be best to entrust adjustments to a reputable specialist. While this may seem presumptuous, I mention it for caution. There is some slight scratching on the selector switch (likely resolved with disassembly and cleaning). Pre-listing Maintenance:- Nut Replacement (Bone)- Overall Polishing (including frets)- Cavity Contact Cleaning- Knob Cleaning- String Replacement (domestic manufacturer)- Various Adjustments 【Shipping】Fedex priory (Free shipping, of course)※Currently, economy service is not available.※An additional shipping fee of 150 USD is required only for Australia.※For Australia, we may use DHL.※EMS is not available. 【Import Duties】Import duties, taxes and charges are not included in the item price.These charges are buyer's responsibility.Please check with customs for these addtional costs before bidding or purchasing.Even if you ask us about Import duties, we cannot give you an exact amount.

Price: 775 USD

Location: Japan

End Time: 2024-11-15T03:22:16.000Z

Shipping Cost: 0 USD