Fluke 2AC Non-Contact Voltage Tester, 90 to 1000V

Description: Fluke 2AC Non-Contact Voltage Tester, 90 to 1000VAlways on for faster, safer voltage testingThe Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. *Your first-choice tool for go/no-go testingThe 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.CAT IV 1000 V overvoltage rated product for best in class user protectionSuitable for a wide range of residential, commercial and industrial needsFluke ruggedness and reliability with a two-year warranty* Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use. SpecificationsOperating PrinciplesSenses the steady state electrostatic ﬁeld produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.Safety ComplianceMeets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2EMC ComplianceMeets IEC 61326-1:2006 Operating90 V AC to 1000 V AC, CAT IV 1000 V ratedTemperature (Operating and Storage)-10°C to 50°C (-14°F to 122°F)Operating Humidity Ranges0% to 95% (0°C to 30°C)0% to 75% (30°C to 40°C)0% to 45% (40°C to 55°C)Altitude2000 m (CAT IV 1000 V)CleaningClean with damp clothBattery LifeTypical battery life of greater than one year

Price: 45.99 USD

Location: Lawrenceburg, Kentucky

End Time: 2023-07-27T22:33:44.000Z

Shipping Cost: 0 USD