For Char-Lynn 101-1001-009 / Eaton 101-1001 Hydraulic Motor 50ML/R Displacement

Description: For Char-Lynn 101-1001-009 / Eaton 101-1001 Hydraulic Motor 50ML/R DisplacementDescriptionThis product is suitable for Char-Lynn 101-1001-009 and Eaton 101-1001. It has high speed and high torque to provide you with more power. It also features a stator rotor and S-bearing, resulting in high precision and strong pressure resistance. It will be your powerful power source! Key FeaturesHigh-quality Material: This product adopts a powder metallurgy valve disc and low carbon alloy steel output shaft, with high wear resistance, high precision, and long service life. Good Sealing: The oil seal adopts three layers of the sealing ring to bear pressure, which can effectively prevent oil leakage. High Precision: The precision processed stator and rotor whose flatness error does not exceed 0.08 inches have high precision. Strong Pressure Resistance: The S-type bearing shaft has a strong radial force and high-pressure resistance, which can effectively extend the service life of the product. Powerful Power: High speed (continuous: 879rpm; intermittent: 975rpm) and high torque (continuous: 81N*M; intermittent: 108N*M) bring you greater power. One-piece Construction: The one-piece construction allows you to start using the product directly without an additional installation. Good Customer Service: Communication is the best way to solve problems. If you encounter any problem after purchase, please contact us in time before opening or unpacking the box. We will do our best to solve the problem for you. DetailsRounded Edges: The rounded edges can effectively prevent you from being accidentally injured in the process of use. Anti-slip Knobs: Both knobs with a striped anti-slip pattern effectively increase friction and make your operation easier. ApplicationThis product is generally applied to harvesting machines, augers, horizontal directional drilling rigs, coal mine type drilling rigs, trenching machines, lawn mower, food machinery, snow plow, concrete mixer, pump truck, sanitation machinery, machine tool, injection molding machinery, small crane, fishing machine, etc. SpecificationMaterial: Cast Iron, Low Carbon Alloy SteelColor: BlackProcess: Powder MetallurgyAssembly Required: NoCompatible: For Char-Lynn 101-1001-009 and Eaton 101-1001Shaft: 2.54cm/1 Inch Straight w/Woodruff Key O-RingMount: 4 Bolt FlangePort Size: ½ NPTF Displacement: 50ML/R 1.69Oz/RFlow Rate: Continuous: 45LPM; Intermittent: 50LPMSpeed: Continuous: 879rpm; Intermittent: 975rpmPressure: Continuous: 12.5MPA; Intermittent: 16.5MPATorque: Continuous: 81N*M; Intermittent: 108N*MGross Weight: 5.5kg/ 12.13 lbs Product Size: 10*10*19.3cm/ 3.94*3.94*7.6 inPackage Size: 26*13*13cm/ 10.24*5.12*5.12in Package Included1 * Hydraulic Motor NotesThe normal operating oil temperature of this product is 68-140 ℉, and the maximum system operating temperature is 194 ℉ (not more than 1 hour).Filter filtration accuracy is 10-30 microns, and it is better to add a magnetic block at the bottom of the oil tank to stop metal chips from entering the system. The solid contamination level of working oil should not be higher than 19/16.Please select the appropriate hydraulic oil according to the actual operation and ambient temperature. The oil viscosity at 104 ° F is 42-74MM2/S.When used in series or parallel, the external drain must be used for pressure relief if the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM). It is better to connect the external drain directly with the oil tank.The best working condition of the motor should be selected at the rated working condition of 1/3-2/3.In order to make the motor have a long service life, when adding load to the motor, it should first operate at 30% of the rated pressure for about 1 hour. In any case, please ensure that the motor is full of oil before adding load to the motor.Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.1.Feature*Unique Appearance,Great Durability2.Feature*Compact Design,Convenient UseBrandOCASAMIYear of manufacture2023Warranty3 YearsFeaturesDurableSurface FinishMade of high quality materialMPNDoes not applyMaterialCast Iron, Low Carbon Alloy SteelColorBlackProcessPowder MetallurgyAssembly RequiredNoCompatibleFor Char-Lynn 101-1001-009 and Eaton 101-1001Shaft 2.54cm/1 Inch Straight w/Woodruff Key O-RingMount 4 Bolt FlangePort Size ½ NPTFDisplacement50ML/R 1.69Oz/RFlow RateContinuous: 45LPM; Intermittent: 50LPMSpeedContinuous: 879rpm; Intermittent: 975rpmPressureContinuous: 12.5MPA; Intermittent: 16.5MPATorqueContinuous: 81N*M; Intermittent: 108N*MGross Weight5.5kg/ 12.13 lbsProduct Size10*10*19.3cm/ 3.94*3.94*7.6 inPackage Included1 * Hydraulic MotorOn Dec 12, 2024 at 21:35:20 PST, seller added the following information:

Price: 137.94 USD

Location: Chino, California

End Time: 2025-01-13T05:30:29.000Z

Shipping Cost: 0 USD