Front & Rear Seal Wear Sleeve Installer For Detroit Diesel Series 60 J-35686-B

Description: Fitment:For use on Detroit Diesel Series 60 and two cycle 92.Use on seal # 23516969 23513578 23513485 23518355 Feature: Great Compatibility — Works on Works on Detroit Diesel Series 60 and two Cycle 92 Engines. Used on multiple Seal & Wear Sleeve Assemblies including 23516969 / 23513578 / 23513485 / 23518355 / 23519651. Superior Quality — Premium grade CNC heavy duty steel with black oxide finish, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life. Upgrade Design — This tool is easier to use due to a simpler design and each part is manufactured to OE# specifications. Directly replaces part #J-35686-B, J-35686 and J-35686-A. Easier Work — Used to install the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seals properly without leakage. OE# Part Number:J-35686J-35686-AJ-35686-B Package Include:1x Seal Wear Sleeve Installer Notes:Please be very careful to check our photos, make sure the photo showed is same as you wanted.Thank you for your kind understanding.If you have any question,Please feel free contact us. Installation:Lubricate the rubber outer diameter of the oil seal with clean engine oil. Lubricate the gear case cover or flywheel housing bore with clean engine oil.Install two guide studs (J–35686–2) through the holes provided in the center guide assembly (J–35686–1) and into two of the tapped holes in the crankshaft 180 degrees apart. Tighten the guide studs. The base must be tight against the end of the crankshaft.Install the spacers to the center screw of the base.Slide the oil seal assembly over the installer base as far onto the crankshaft hub as possible. Slide collar with the stepped side contacting the seal. Slide the installer cup over the guide studs and installer base.Lubricate the center screw of the base with extreme pressure lubricant. Install the thrust bearing with the case side toward the installer cup and install the hex nut to the center screw of the base.Tighten the hex nut until the oil seal and wear sleeve are pressed into the flywheel housing or gear case cover.When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Remove tools. Payment We support multiple payment methods. Shipping Notice: The Guaranteed Date is automatically generated and displayed by ebay. We cant change it and cant control the speed of delivery, its depend on the carrier. We will ship your item out asap after the payment is clear. Usually your Items will be shipped within 1-3 business day after your payment is cleared. International orders may take 10 to 30 business days to arrive. We have CA, NJ warehouses and ship items may vary according to the stock. Returns You can return your unused items back for exchange or refund within 30 days. Please contact us for return process before you return the item. Contact Us Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution. Please dont open case via eBay or PayPal. We do our best to resolve any issue. Leaving negative feedback and low ratings doesnt get things solved. So please talk with us and we will not let you down. Feedback We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved.

Price: 96.66 USD

Location: Monroe Township, New Jersey

End Time: 2025-02-05T13:45:57.000Z

Shipping Cost: 0 USD