Fuel Injector Cleaner Tester Car Motor Fuel Injector Ultrasonic Cleaning Machine

Description: 【MS200】 Description:1.LUTIFIX MS200 Fuel Injector Tester & Cleaner is a professional 4 cylinders auto fuel injector testing cleaning machine. We can cleaning and testing both petrol car and motorcycle injector with this machine.(motorcycle support HONDA YAMAHA SUZUKI SANYANG only).2.We can even clean fuel system, throttle valve without disassembly via LUTIFIX MS200 (need additional accessories)It is good at remove carbon from your fuel system, testing leaking ,Uniformity,inbreathe about injectors. Feature:Fuel Injector Tester & Cleaner: LUTIFIX MS200 Fuel Injector Cleaner Tester can be used both for cleaning and testing injectors. Perfectly suited for removing carbon from your fuel system, testing leaking, sprayability and testing fuel injectors in different situations.Hi-tech Ultrasonic Cleaning: Built-in Ultrasonic mechanism. Different from the traditional way, it works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly.Efficient & Labor-free: 4 injectors can be tested and cleaned at one time. Support reverse cleaning & on-vehicle cleaning. Plus, it can also be used on 6 cylinders, twice tests will do.Environmental Friendly& Widely Use: The used cleaning fluid and testing fluid can be easily recovered. Support most of the automobile and motorcycles in the market. Applicable voltage is compatible with 110V or 220V.2-Year Warranty: For damage caused by non-human factors,We promise to resend parts for free within 2 years. For any needs,you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. ULTRASONIC CLEANING & THREE TEST MODES: 1.Uniformity & Sprayability Test. 2.Leakage Test. 3.Injecting Flow Test. ULTRASONIC CLEANING: It works by sending an ultrasonic vibration signal to the injector nozzle through the pulse signal line, which makes the stubborn carbon deposit jitter strongly and removes more thoroughly. FUEL INJECTOR TEST: Determine whether the injector flow is normal by observing the glass tube with liquid level. Specification: Fuel Tank Capacity: 2000ml.Capacity of Measuring Cylinder: 125ml.Speed Range: 0~7500rpm.Injecting Times: 0~9900 Step: 100ms.PWM Pulse: 0~20.0 ms Step: 0.1 ms.System Pressure: 0~0.6Mpa (Adjustable).Time: 0~20 Minute (Adjustable).Power of Ultrasonic Cleaning: 70W.Frequency of Ultrasonic Cleaning: 28 KHZ±0.5 KHZ.Size: 303*325*300mm.Weight: 9.4KG. Working Condition:Power Supply: AC220V/AC110V±10%.Frequency: 50HZ/60Hz±0.5.Humidity: ＜85%.Environment Temperature: 0℃～＋40℃.Magnetic Field: ＜400Ａ/m.Spark and fire are prohibited. Easy To Operate:Step 1: Pour in the injector detergent and place the injector nozzle in the ultrasonic cleaner tank.Step 2: Connect the pulse signal wire and select the ultrasonic cleaning function to remove the carbon deposit.Step 3: Pour in the test liquid, install the fuel injector to the oil separator and fix it to the main unit by bolts.Step 4: Test whether the injector nozzle is leaking or blocked under different functions. NOTE:1.This one was for 4 cylinder car (It will fit for 2 cylinder after blocking two test tube).2.The machine work on Petrol injector, NOT for Diesel injector.3.Support For 99% Cars & Motorcycles. Motorcycle injector testing for HONDA, YAMAHA, SUZUKI, SANYANG only(adapter need extra fee ).4.Convert cable come with machine, please try to use the convert cable if pulse cable can not match your injector. Package Include:1PC* LUTIFIX MS200 Fuel Injector Cleaner Machine Main Unit.1PC* Oil Separator.1PC* Funnel.2Pcs* Pulse Signal Cable.1PC* Cleaning Fluid Drain Valve.2Pcs* Fixing Bolt.4Pcs* 14mm Cleaning Connector.4Pcs* 17mm Cleaning Connector.4Pcs* Washer.3Pcs* Plug.1PC* Ultrasonic Cleaning Cover.1PC* Ultrasonic Cleaning Bracket.1PC* Power Cable.1PC* User Manual. 【MS300】 Description:1.LUTIFIX MS300 Fuel Injector Tester & Cleaner is an intelligent injector cleaning & testing equipment with intelligent control. The whole process can be operated by the touch screen or rotary knob to complete. 2.Equipped with an ultrasonic cleaning tank, LUTIFIX MS300 Fuel Injector Tester & Cleaner can generate an oscillating signal to the injectors to remove the stubborn carbon deposits from the injectors. It is possible to test injectors under different conditions, such as Sprayability Test, Leakage Test, Injecting Flow Test, etc. Feature:Intelligent Control Panel Design: To deliver premium user experiences and make it more efficient to use, LUTIFIX MS300 Fuel Injector Tester & Cleaner is designed with Touch Screen and Rotary Knob. With large 4.4-inch screen display, it is easy to observe various working parameters.Ultrasonic Cleaning Tech: LUTIFIX MS300 Fuel Injector Tester & Cleaner intelligent injector cleaner and tester is equipped with a separate ultrasonic cleaning tank. The vibration signal generated by ultrasonic waves is applied to powerfully clean the surface and interior of the fuel injectors, so as to completely removing stubborn carbon buildup from the fuel injectors.Multiple Test Functions: LUTIFIX MS300 Fuel Injector Tester & Cleaner can carry out Sprayability test, Leakage test, Injecting Flow test, Automatic test and many other testing functions. A variety of test parameters can be set to simulate injector testing under various operating conditions.Backlight Design & Level Gauge: The glass tube can be observed through the level gauge during the test, so that the injector flow can be determined whether the flow is normal. At the same time, the backlight can assist in making the observation more carefully. 2-Year Warranty: For damage caused by non-human factors,We promise to resend parts for free within 2 years.For any needs,you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. WIDELY USE: Support most of the automobile and motorcycles in the market. Applicable voltage is compatible with 110V or 220V. ULTRASONIC CLEANING: It can powerfully clean the surface and interior of the fuel injectors, so as to completely removing stubborn carbon build-up from the fuel injectors. UNIFORMITY＆SPRAYABILITY TEST: Under identical operating conditions, the Sprayability of the fuel injectors can be observed and determined. LEAKAGE TEST: Inspect the sealing of the fuel injectors under system pressure to find out if the injectors have leakages. INJECTING FLOW TESE: Determine whether the injector flow is normal by observing the glass tube with liquid level. AUTOMATIC TEST: Following a pre-set pattern, it can automatically cycle and simulate various working conditions to test the injectors. Specification:Power Supply: AC 110V/220V±10%, 50/60Hz.Equipment Power: 150W.Ultrasonic Cleaner Power: 60W.Pressure Unit: Bar.Working Pressure: 0~10bar.Simulated RPM Range: 20~10000RPM.Pulse Width: 0.5ms~25ms.（Stepping 0.1ms）Uniformity/Sprayability Test Time: 1~20Min.Leakage Testing Time: 1~30Min.Injector Testing Time: 3~120s.Automatic Draining Testing Liquid Time: 60s.Main Unit Size: 270*310*340MM（10.6*12.2*13.4 Inch）.Package Weight: 8.9KG. Working Conditions: Temperature: -10~+40℃.Relative Humidity: ＜85%.Intensity Of Outer Magnetic Field: ＜400A/m.NOTE: No Flame Within 2 Meters. Easy To Operate:Cleaning Sequences:NOTE: Test liquid and detergent won’t be provided by the manufacturer.1.Remove the injector from the vehicle engine to check the o-rings for damage. Replace the damaged O-ring with another same type O-ring to avoid leakage during testing.2.Put the outside of injectors in gasoline or detergent, and wipe them with soft cloth after cleaning the outside oil sludge carefully.3.Check the liquid level and refill test liquid when necessary. Fill the test liquid through the filler on the side of the unit and observe the liquid level in the fuel level viewer.Do NOT exceeding the Max line.4.Turn on the power switch on the left side of the Cabinet.5.Fill ultrasonic detergent into the ultrasonic cleaning launder so that the needle valve of the injector is covered by the detergent.6.Connect the injectors with the correct couplers. Testing Sequences:A complete cleaning and testing sequence shown below should be followed:Ultrasonic Cleaning——Uniformity/Sprayability Test——Leakage Test——Injecting Flow Test——Automatic Test.（Please Refer To The Manual For Detailed Operation Steps.） Package Include: 1PC* LUTIFIX MS300 Main Unit.1PC* Ultrasonic Cleaning Tank.1PC* Testing Pad.1PC* Ultrasonic Leaning Stand.4Pcs* Connector 1 (H19*25*10.5).4Pcs* Connector 2 (H19*25*13.5).4Pcs* Fine-tooth Joint(H19*25*M12).4Pcs* Coarse Joint(H19*25*G1/4-19).3Pcs* Plug (25*40*16.2).4Pcs* Reverse Joint(25*40*16.2). 2Pcs* Adjusting Stud (M10*78).2Pcs* Compression Screw(18*100*M10).2Pcs* Knurled Nut(18*30*M10).1PC* 4-oil Separator(28*16*213).1PC* Funnel (58*50*8.0).1PC* Wrench For Oil Draining(24*56*5).20Pcs* Sealing Ring 7*2.65.4Pcs* Seal Ring 15.6*2.65.2Pcs* Power Cables (EU US Standard).2Pcs* Pulse Signal Lines. LUTIFIX FUEL INJECTOR CLEANER Model MS200 MS300 Power Supply AC110V/220V±10% AC110V/220V±10% Frequency 50HZ/60Hz±0.5 50HZ/60Hz±0.5 Cleaning Frequency 28KHZ 28KHZ Fuel Tank Capacity 2000ml 2100ml Ultrasonic Cleaner Power 70W 60W Speed Range 0-7500r/min 0-7500r/min Main Unit Dimensions 303*325*300mm 270*310*340mm Main Unit Weight 9.4kg 8.8kg

Price: 422.99 USD

Location: shenzhen

End Time: 2025-01-08T09:26:16.000Z

Shipping Cost: 0 USD