Jardan

Garolite 3D Printer Surface 305mm x 305mm x 1mm

Description: Garolite print surface for 3D printing. Thin Garolite sheets can be attached to flex plates and allow for fast part removal. Garolite comes in a multitude of compositions and colors. Most companies sell the "Red" colored Garolite sheets for printing on, however, I prefer this grade, even though it is more expensive. My Garolite contains no fiberglass like many other grades, including the "Red" Garolite. Once sanded, the microfibers from the woven material bond tightly to your printed materials, latching onto them tightly. When you clean your print surface in between multiple prints, sand it to remove debris and raising new fibers. This can be done hundreds of times, renewing the surface. I don't always print in the same spot, moving my prints around the bed. How many times you can print before cleaning depends on size and parameters of the print. I usually get about ten prints before I clean and re-sand the surface. 305 x 305 x 1mm (12" x 12")Free hold down clips (12) Can be wet sanded for even greater part adhesionNo glue stick or other adhesive necessaryPerfect for printing nylon which easily warps Notes: Please measure your build surface before ordering. Other sizes are available upon request. * Garolite sheet can be wet sanded with a 60 - 200 grit sanding sponge from HomeDepot. Use 1 drop of dish soap while sanding to remove any oil from handling the surface. Rinse and dry before reinstalling onto your printer. **Hold down clips should be re-bent and annealed prior to use. Please see youtube video: Design Test Prototype " The Ultimate Ender 3 Evolution - A Nylon and Polycarbonate Printing Beast" - ***The clips are "Free" and I do not offer any warranty with them, they are just a nice extra item that should help you hold your Garolite down for printing. Many use the squeeze open style clips. I prefer 3M adhesive film personally. **** Garolite sheets may be cut to size by scoring with a razor blade (please see video above for examples) *****If adhering to a spring steel magnetic surface, use high temperature thermally conductive 3M adhesive sheets are available here: https://www.ebay.com/itm/264964939813

Price: 24.99 USD

Location: Hesperia, California

End Time: 2024-02-02T13:09:57.000Z

Shipping Cost: N/A USD

Product Images

Garolite 3D Printer Surface 305mm x 305mm x 1mmGarolite 3D Printer Surface 305mm x 305mm x 1mmGarolite 3D Printer Surface 305mm x 305mm x 1mmGarolite 3D Printer Surface 305mm x 305mm x 1mm

Item Specifics

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 14 Days

Refund will be given as: Money back or replacement (buyer's choice)

Compatible Brand: Universal

Type: Print Bed

Brand: UTVengineering

Recommended

TinkSeal™ - Ultra High Pressure Lubricating Grease with Nano particle transfer.
TinkSeal™ - Ultra High Pressure Lubricating Grease with Nano particle transfer.

$24.99

View Details
YAMAHA - ULTRAMATIC POLYUREA GREASE SUBSTITUTE - TinkSeal™
YAMAHA - ULTRAMATIC POLYUREA GREASE SUBSTITUTE - TinkSeal™

$24.99

View Details