Gimbel Lower Fairing For SUZUKI SV 650 N+S (WVBY) | 03-15

Description: Gimbel, Auto- u. Motorcycle Technology GmbHKesslerstrasse 7 79206 Breisach Since 1979 - the address for exclusive conversions! Gimbel attachment panelFor SUZUKI SV 650 N + S2003 - 2015 (Type: WVBY) NEW / OVP 549,00* 469.00* *in EUR incl. VAT Description Original Gimbel attachment fairing including Belly Pan This fairing was specially developed for this motorcycle and visually adapted to the design of the motorcycle Makes the motorcycle look more complete and dynamic Effectively protects the engine from stone chips and improves aerodynamics All-round edges increase stability with minimal weight The attachment panel is made of glass fibre reinforced plastic (GRP) The surface is a layer of grey coloured gelcoat GRP is a fiber-plastic composite consisting of synthetic resin and glass fibers GRP has a high elongation at break and a high elastic energy absorption Standard side and center stands can continue to be used The production takes place in our own production facility entirely in Germany The attachment panel is made entirely by hand The attachment panel is a blank that is unpainted TÜV parts certificate for vehicle type: WVBY Technical data Manufacturer: Gimbel Motorcycle Technology Vehicle manufacturer: SUZUKI Vehicle model: SV 650 N + S Vehicle year of manufacture: 2003 - 2015 Vehicle type: WVBY Material: Grey colored GRP Colour of the attachment panel: unpainted Scope of delivery Handcrafted GRP attachment panel (3 parts: Belly Pan + left and right side panels) Mounting and screw set TÜV parts report The manufacturing steps of our GRP parts (hand lamination) 1. Model and mold making Each of our fairings has been specifically developed for each motorcycle model. Starting with model making, in which the later workpieces are designed and constructed. After the idea in mind and initial sketches, the prototype is modeled using clay, cardboard, filler and other moldable materials. Based on this prototype, a negative mold is then created from mold-making resin and fiberglass fabric. 2. Apply separating layer First, a separating layer of wax is applied to the mold and then polished with a cotton cloth. This avoids a connection between the mold and the workpiece. 3. Apply top coat After the release layer has completely dried, the top layer resin (gelcoat) is applied. This layer forms the later surface and has special surface properties compared to laminating resins. The top coat then needs to dry a little. 4. Laminate After the top layer has dried, the cladding part is laminated. Glass fibers and laminating resin are laminated layer by layer by hand. In general, the orientation of the reinforcing fibers is incorporated in the direction of loading. Everything then hardens for at least 24 hours at 25°C. 5. Forming After drying, the molding process begins. For this purpose, the mold is disassembled into its individual parts and the component can be easily removed thanks to the applied separating layer. 6. Sanding edges To ensure a clean finish on the edges of the workpiece, these are sanded down after demoulding and thus brought into shape. The blank is now ready 7. Attach the type plate Each of our trim parts that requires a TÜV registration has a type plate laminated in. This is attached in a clearly visible location on the inside. This should be covered before painting. Purchase process Our shipping partner DHL Our service ShipmentDirectly from Germany German dealer1 month return policy 40 years of experienceHandcrafted production Invoice with VATGerman VAT ID SecurityRegistered in the commercial register Our payment methods PayPal Visa MasterCard American Express Transfer Contact and help Send us an email We look forward to hearing from you Call us You can reach us Monday - Friday 09:00 - 12:00 | 15:00 - 18:00 Visit us You are welcome to visit us in person on your tour:Gimbel Auto- u. Motorradtechnik GmbH | Kesslerstrasse 7 | 79206 Breisach Design & programming powered by SOTA.solutionsAfter the idea in mind and initial sketches, the prototype is modeled using clay, cardboard, filler and other moldable materials. Based on this prototype, a negative mold is then created from mold-making resin and fiberglass fabric. After the release layer has completely dried, the top layer resin (gelcoat) is applied. This layer forms the later surface and has special surface properties compared to laminating resins. The top coat then needs to dry a little. Glass fibers and laminating resin are laminated layer by layer by hand. In general, the orientation of the reinforcing fibers is incorporated in the direction of loading. Everything then hardens for at least 24 hours at 25°C. After drying, the molding process begins. For this purpose, the mold is disassembled into its individu

Price: 496.34 USD

Location: Breisach

End Time: 2024-12-23T18:18:00.000Z

Shipping Cost: 52.81 USD