GM Chevrolet Chevy GMC 350 5.7L L05 Premium Crate Engine Long Block 87-95

Description: Discount prices on quality New & Reconditioned Automotive Replacement Parts New GM 5.7 / 350CI Crate Engine* Information : 1987-1995 Chevy/GMC trucks with 350 / 5.7L vin code "K" engine* Specs : 1986 and up 4 bolt main 1 piece crankshaft seal block Horsepower - 210HP @ 4000RPM Torque - 300FT/LBS @ 2800RPM Forged steel crankshaft Powdered metal connection rods Dished hypereutectic pistons 9.25:1 Compression ratio High volume oil pump Morse link type timing chainMechanical Fuel Pump Provision * Camshaft specs as follows:Flat tappet hydraulic camshaft Intake lift .382" Exhaust lift .402" Intake duration @.050-165.9 Exhaust duration @.050-174.8 Lobe center separation - 111.9 * Camshaft mechanical specs Intake valve opens @ -30.2 BTDC * Intake valve closes @ 16.1ATDC * Intake lobe centerline - 111.8 Exhaust valve opens @ 18.1BBDC * Exhaust valve closes @ -23.3 ATDC * Exhaust lobe centerline - 111.8 * Cylinder Head Specs:Casting number 14102193 Swirl port intake port design 64cc Combustion chamber 1.94" Intake valve 1.50" Exhaust valve Valve spring part number is 3911068 (same spring used with the old 300hp 350 crate engine) Installed height 1.70" Pressure @ Installed height is 80 LBS * Pressure with valve open is 267 lbs. These springs are good for .550" lift but clearance between guide and retainer must be double checked before attempting. 7 Bolt exhaust flange Center bolt valve cover flange 1987-1995 Intake manifold bolt pattern with center intake bolts canted @ 72 angle **This cylinder head is not a performance oriented cylinder head. It is classified as a high swirl head that was intended for good bottom end torque and fuel economy. The intake runner is restrictive because it has a ramp cast into the bottom of the bowl to promote high swirl. ** ** Fitment Note: This four bolt main block engine is designed as a stock replacement for 1987-1995 C/K-Series TBI trucks with 7,200 GVW (or lower) , VIN code K, and is legal for sale and use in California for these same applications. This engine has the mechanical fuel pump provision with block off plate included. This engine is not designed, nor intended to be used in any marine applications. Engines installed in vehicles registered and normally operated outside of the United States carry no warranty. **180 DAY Warranty**: Our Engines are warranted against manufacture defects for a period of 6 months / Unlimited Miles. Return freight to Bishop Engine is the buyer’s responsibility. Authorized repair or replacement of the original engine does not extend warranty period. Repair or replacement is at the sole discretion of the Seller. THIS IS A PART ONLY WARRANTY AND DOES NOT INCLUDE REIMBURSEMENT FOR LABOR. This warranty does not cover damage due to abuse, neglect, accidental breakage externally or internally, lack of lubrication, excessive heat, incorrect fluid, or use for any purpose other than originally intended. In no event shall the Seller be held responsible for any consequential or incidental damages from the use of a product or improper installation. Original manufacturer’s maintenance schedules must be maintained by buyer with records available upon request of Seller. This warranty does not cover towing, car rental, meals, fluids, lost wages, lodging, labor, miscellaneous expenses or lost income from loss of vehicle use. External parts, sensors, speed sensors, and electrical wiring are buyer’s responsibility to replace/maintain with certified installations. Warranty is not transferable. ENGINE MUST BE INSTALLED BY A CERTIFIED SHOP AND INSTALLER AND REGULAR MAINTENANCE PERFORMED. PROVE OF MAINTENANCE MUST BE PROVIDED IN CASE OF A WARRANTY CLAIM. *BREAK IN OIL: ENGINE OIL MUST BE REPLACED AFTER THE FIRST 4 HOURS OF BREAK IN. 5W30 WEIGHT CONVENTIONAL / MINERAL OIL WITH ZINC ADDITIVE (MAXIMA BREAK IN OIL OR ADD LUCAS TB ZINC PLUS TO STANDARD *NON SYNTHETIC* 5W30 OIL, NO SYNTHETICS TILL ENGINE IS COMPLETLY FULLFILLED BREAK IN PERIOD. IN CASE OF A WARRANTY CLAIM: WE WILL ASK TO SPEAK WITH THE CERTIFIED INSTALLER AND THEY WILL BE ASKED TO PERFORM SOME TEST TO DETERMINE THE CAUSE OF ANY FAILURE. WE WILL NEED RECEIPT OF INSTALLATION FROM THE CERTIFIED INSTALLER.(SHOWING VEHICLE VIN NUMBER , MILES,YEAR ,MAKE AND MODEL. PROOF OF MAINTENANCE RECEIPTS.BEFORE WE CAN VALIDATE A WARRANTY, WE WILL NEED TO RECEIVE THE Engine long Block BACK FOR INSPECTION AND FREIGHT PAID BY CUSTOMER. **SHIPPING DOES NOT Include Alaska , Hawaii, and or US Protectorates, American Samoa, Guam, Mariana Islands, Marshall Islands, Micronesia, Palau, Puerto Rico, U.S. Virgin Islands**

Price: 5099.95 USD

Location: Dallas, Texas

End Time: 2025-01-07T18:01:43.000Z

Shipping Cost: 0 USD