HG Meteorological Station Louver Weather Station Temperature Humidity Illuminat

Description: Feature:1. EASY INSTALLATION: Only a few screws are needed for fixing, easy to install and saves time and labor. Only 1 signal cable is needed, simple and convenient wiring. 2. SENSORS: Integration of atmospheric temperature, atmospheric humidity, light strength, CO2 sensors, all integrated into one, providing a full range of meteorological information monitoring. 3. SIMPLE APPEARANCE: This meteorological station louver box adopts a one piece design, which is simple and beautiful, and easy to install and wire. 4. PREMIUM MATERIAL: The addition of anti UV and anti aging materials and unique structural design gives it high reflectivity, low heat conductivity and UV resistant function, which is suitable for use in various harsh climatic conditions. 5. WIDELY HARD: This meteorological station louver box provides important data support for meteorological research, agricultural production, environmental monitoring and other fields. Specification: Item Type: Meteorological Station Louver Material: ABS Weight: Approx. 1266g / 44.7oz Features: Atmosphere Temperature, Atmosphere Humidity, Light Strength, CO2 Power Supply: 9-30V Product Size After Bending Plate Installation: Approx. 262x215mm/10.31x8.46in Louver Box Size: Approx. 140x127mm/5.51x5.00in Light Strength: Measuring Range 0-200000Lx (Outdoor), 0-65535Lx (Indoor) , Accuracy ±4%, Resolution 1Lx, Power Consumption 0.1mW CO2: Measuring Range 0-5000ppm, Accuracy ±(50ppm+5%), Resolution 1ppm, Power Consumption 100mW Atmosphere Temperature: Measuring Range -20-50℃ (Analog Signal Output), Accuracy ±0.3℃ (Standard), Resolution 0.1℃, Power Consumption 1mW Atmosphere Humidity: Measuring Range 0-100%RH, Accuracy ±5%RH (Standard), Resolution 0.1%RH, Power Consumption 1mW Sensor Total Power Consumption: Equal to Multielement Power Consumption and Main Board Basic Power Consumption Operating Environment: -40℃-+75℃ Main Board Basic Power Consumption: 200mW Protective Level: IP54 Wiring: Red Wire: VCC Positive Power Supply Green Wire: GND Negative Power Supply Black Wire: Signal Line 1 Yellow Wire: Signal Line 2 White Wire: Signal Line 3 Brown Wire: Signal Line 4 For Modbus CRC Check Steps: 1. Preset the 16 bit register to hexadecimal FFFF, call this register the CRC register; 2. Dissimilarize the first 8 bits of data with the lower bit of the CRC register and place the result in the CRC register; 3. Move the contents of the register one bit to the right (toward the low bit), fill the highest bit with a 0, and check the lowest bit; 4. If the lowest bit is 0: repeat step 3 (move again) if the lowest bit is 1: the CRC register is iso orthogonal to the polynomial A001 (1010 0000 0000 0001); 5. Repeat steps 3 and 4 until right shifted 8 times so that the entire 8 bit data is all processed; 6. Repeat steps 2 to 5 for the next 8 bit data; 7. The final CRC register obtained is the CRC code (the CRC code obtained is low before high). Installation Place Requirements: 1. Good air circulation around 2. Away from exhaust vents, motors and other equipment 3. Away from areas of standing water, fountains, sprinklers, etc.

Price: 179.03 USD

Location: Shenzhen

End Time: 2025-01-14T12:12:44.000Z

Shipping Cost: 0 USD